Category: Strippers

LMR400 Cable Prep Stripping Tool | All-In-One Coax Cable

LMR400 Cable Prep Stripping Tool | All-In-One Coax Cable Stripper & Trimming Tool For 3/8″ LMR 400 Coaxial Connector Preparation. For Use With Times Microwave Systems & Other Connectors All In One Solution: Used as a coax stripper tool & cable trimming tool & deburring tool in one device. Why carry around multiple products, when one easy to use device can get the job done. Simple Two Step Process: Insert the cable on one side & twist to expose the center conductor, then insert on the other side and twist to expose the coax braid. Over its lifetime, this tool...

CREWORKS Automatic Wire Stripper Machine, 8 Channel Electric

CREWORKS Automatic Wire Stripper Machine, 8 Channel Electric Wire Stripping Machine for 0.06 to 0.67 in. Copper Wires, Electric Cable Stripper Machine with 5 Blades and All-Copper Motor for Recycling Automatic Stripping: This automatic wire stripper by Creworks removes plastic and rubber insulation from old electrical wiring at speeds up to 98.4 ft. per minute, powering its 5 ultra-shape blades with a 40W all-copper motor Wide Application: The 8 separate feed channels of this cable stripper machine cover every width of copper wire from 0.06 to 0.67 in., letting you safely and easily handle all the most common sizes all...

Manual Wire Stripper Machine,0.12″-1.18″ Wire Stripping

Manual Wire Stripper Machine,0.12″-1.18″ Wire Stripping Machine, Wire Stripping Tool for 3-30mm Scrap Wire, Hand Crank or Drill Powered for DIY Cable, Copper Wire Stripper for Leftover Cable Recycling Wire Stripping Made Easy: This manual wire stripping machine features an easy-to-handle hand crank to power its steel blade and remove insulation from scrap wires. Connect your power drill to this wire stripper for automatic cranking Suitable for cables of various widths: The 5 feed hole plates for this cable stripper cover wires from 0.12" to 1.18" (3mm,5mm,10mm,20mm,30 mm), letting you safely and easily handle the most common wire sizes Effortless...

Electric Wire Stripping Machine

Electric Wire Stripping Machine, 0.06''-0.67'' Automatic Wire Stripper Machine with 6 Channels 5 Blades, Electric Cable Stripper Machine with 35 W All-Copper Motor for Leftover Cable Recycle Automatic Strip: Equipped with a 35W all-copper motor & an advanced 5-blade stripping system, this electric wire stripper machine removes insulation at speeds up to 19.69 ft. per minute, delivering efficient and consistent results while reducing time and effort. Greater Compatibility: With 6 built-in stripping holes, the EASYWOX electric cable stripper machine handles wires from 0.06 to 0.67 in (1.5–17 mm). Suitable for handling hard cover wires, multi-conductor wires, mono-filament wires, etc. Note:...