Outdoor Faucet Cover, Stainless Steel with Insulated Foam Liner Removable insulated cover for winter use; Wall-mounted base with two sliding latches for easy faucet access

• Easy Access When You Need Your Faucet: Slide both latches outward to remove the insulated spigot cover while the base stays on the wall; refit the cover and slide the latches inward to secure it, without tools or loosening latch screws after base installation
• Stainless Steel Outside, Insulation Inside: This outdoor faucet cover combines a stainless steel shell with a foam liner for cold-weather use; the liner helps slow heat loss around the faucet, while the metal shell helps protect the foam from physical damage
• Wall-Mounted Support: This hose bib cover attaches to a screw-mounted ring base that remains on the wall when the cover is removed; first-time installation requires tools and suitable wall fasteners
• Check fit before mounting: Measure faucet width, height and projection from the wall; allow clearance for the tapered liner, mounting base and latch movement
• Included components: One cover with foam liner, one installation ring base and five screws; use four screws for mounting and keep the fifth as a spare

First Install Requires Tool

Check the Fit,Test the ring and cover fit before drilling.

Position The Mounting Ring

Hold the ring in its final position and mark all four mounting holes. Check for hidden pipes and wires.

Secure The Mounting Ring

Use fixings suitable for your wall. Secure all four mounting points

Seat and Lock the Faucet Cover

Seat the Faucet cover in the ring. Slide both latches inward over the rim and check that both are engaged.

• Will this cover fit my outdoor faucet?

  Measure the full faucet, including its handle and fittings. Compare its width, height, and distance from the wall with the usable interior dimensions. The cavity narrows toward the closed end.

• Do I need tools every time I remove the cover?

  Tools are needed to screw-mount the ring initially. After installation, support the cover and slide both latches outward to remove it. The ring stays on the wall; the latch screws do not need to be loosened.

• Does the mounting ring need screws?

  This version mounts with four screws. Five screws are included: four for mounting and one spare. Use fixings suitable for your wall material.

• Can I leave a hose or splitter attached?

  Disconnect hoses before freezing weather. Any fitting left in place must fit fully inside the cavity without interfering with closure.

• Does this cover heat the faucet?

  No. The foam liner provides insulation but has no heating element. It helps slow heat loss.

---

Product description

1. 
2. 
3. 

Seat and Lock the Faucet Cover

Seat the Faucet cover in the ring. Slide both latches inward over the rim and check that both are engaged.

• Will this cover fit my outdoor faucet?

  Measure the full faucet, including its handle and fittings. Compare its width, height, and distance from the wall with the usable interior dimensions. The cavity narrows toward the closed end.

• Do I need tools every time I remove the cover?

  Tools are needed to screw-mount the ring initially. After installation, support the cover and slide both latches outward to remove it. The ring stays on the wall; the latch screws do not need to be loosened.

• Does the mounting ring need screws?

  This version mounts with four screws. Five screws are included: four for mounting and one spare. Use fixings suitable for your wall material.

• Can I leave a hose or splitter attached?

  Disconnect hoses before freezing weather. Any fitting left in place must fit fully inside the cavity without interfering with closure.

• Does this cover heat the faucet?

  No. The foam liner provides insulation but has no heating element. It helps slow heat loss.