Statik HyperMount (Gen 3) Magnetic Phone Holder, for iPhone
Statik HyperMount (Gen 3) Magnetic Phone Holder, for iPhone and Android Upgraded Magnet Strength, Nano-suction Adhesive Gel, 360° Rotation, Compatible with MagSafe, Metal Rings for Android
- NANOSUCTION VACULOCK BASE: Proprietary adhesive technology grips smooth and very lightly textured hard surfaces like flat dashboards, mirrors, and tile with solid holding force.
- UPGRADED N52 MAGNETIC HEAD: Thicker magnet array so that your phone snaps on fast and stays locked in for maps, calls, recipes, workouts, filming, and hands-free flow.
- 360º ANGLE CONTROL: Dual hinges and a 360º center pivot let you rotate, tilt, and dial in the exact view. Portrait. Landscape. Driver view. Creator view.
- RINSE TO REFRESH: Dust happens. Rinse the VacuLock base, let it dry, and press it back down to bring the grip back.
- MAGSAFE COMPATIBLE WITH METAL RINGS FOR ANDROID: Snaps directly to MagSafe-compatible iPhones and cases. Includes metal ring adapters for Android phones, older iPhones, and non-MagSafe cases.
- WHERE IT WORKS BEST ON: The HyperMount forms its strongest seal on smooth, non-porous surfaces like glass, mirrors, dashboards, tile, countertops, tables, desks, and sealed wood cabinets. Not recommended for leather, fabric, curved surfaces, or heavily textured materials, as these prevent a proper suction seal.
- TESTED TO KEEP EVERYTHING IN PLACE: After 1,000+ open-and-close cycles and hours of vibration testing, it stays secure through bumps, sudden stops, and sharp turns, with over 6.6 lbs of magnetic hold. It also holds its grip in extreme temperatures, tested down to -4°F without loosening.
Why is the HyperMount so strong?
The VacuLock grip uses thousands of microscopic suction cups to keep it tightly secured to smooth, flat surfaces. It stays locked in place, everytime.
How do I get the HyperMount off? It's on there really strong!
Good news – that strong grip is exactly what it's meant to do, and it's normal for it to feel very strong the first couple uses. If the pull-tab won't release it, pry up one edge of the suction cup with your finger to break the seal, then lift off.
Will HyperMount stick to leather style dashboards after its treated with Armoral or leather treatment?
No, this type of treatment leaves behind a residue which prevents the VacuLock system from sticking to the surface. If you have done this treatment, you must completely clean and remove the surface treatment before use.
Will HyperMount stick to leather type dashboards after the treatment has dried?
No, this type of treatment leaves behind a residue which prevents the VacuLock system from sticking to the surface. If you have done this treatment, you must completely clean and remove the surface treatment before use.
Will the HyperMount stick to glass if it’s been treated with Anti-Fog sprays or glass cleaners?
Yes! These types of sprays and cleaners do not leave behind any residue that prevents the VacuLock system from working.
| SKU: | B0H42J4G9X |
| Brand: | Statik |
| Model: | HyperMount (Gen 3) |
| Colour: | Gen 3 |
| Manufacture: | Curv Group LLC |
| Colour: | Gen 3 |
Product description
Why is the HyperMount so strong?
The VacuLock grip uses thousands of microscopic suction cups to keep it tightly secured to smooth, flat surfaces. It stays locked in place, everytime.
How do I get the HyperMount off? It’s on there really strong!
Good news – that strong grip is exactly what it’s meant to do, and it’s normal for it to feel very strong the first couple uses. If the pull-tab won’t release it, pry up one edge of the suction cup with your finger to break the seal, then lift off.
Will HyperMount stick to leather style dashboards after its treated with Armoral or leather treatment?
No, this type of treatment leaves behind a residue which prevents the VacuLock system from sticking to the surface. If you have done this treatment, you must completely clean and remove the surface treatment before use.
Will HyperMount stick to leather type dashboards after the treatment has dried?
No, this type of treatment leaves behind a residue which prevents the VacuLock system from sticking to the surface. If you have done this treatment, you must completely clean and remove the surface treatment before use.
Will the HyperMount stick to glass if it’s been treated with Anti-Fog sprays or glass cleaners?
Yes! These types of sprays and cleaners do not leave behind any residue that prevents the VacuLock system from working.
How long I’ve used it: A few weeks
What I Liked:
Premium Materials, Excellent Craftmanship: You can tell right out of the box that this isn’t cheap plastic. The materials look and feel durable, and the finish is top-notch. Manufacturing is precise with zero wiggle in the joints.
Jeep Gladiator Approved: I have it mounted on the dash of my Jeep Gladiator Rubicon, and it works exceptionally well, staying exactly where I set it (yet simple to remove and relocate if desired). The adjustment mechanism is solid. It doesn’t sag or drift downward over time, so your phone stays right where you position it, even on rough terrain.
Easy Ring Setup: I had to attach one of the two included self-adhesive metal rings to my Android phone case, but installation was quick and easy, and it works perfectly with the magnetic mount. Newer iPhones and some Android phones and phone cases have this built-in. The magnetic attachment from the mount to your phone is VERY strong. Works equally well in portrait or landscape mode.
Bottom Line: If you appreciate high-quality build, sleek design, and a mount that actually holds its angle, this is well worth it. Excellent fit, finish, and overall performance!
Hypermount Gen3
The magnet is incredibly strong, and the suction cup stays firmly in place even on bumpy roads. I also love how compact it folds when not in use. It’s easy to move between cars and even works great around the house.
Finally, a phone mount that doesn’t fall off!
I’ve gone through so many car mounts that drop my phone at the any pothole, but the Statik HyperMount is a total game changer.
The magnetic grip on this thing is ridiculously strong. You put your phone on, and it just stays!
My favorite part is the rotating arms. Instead of being stuck with one awkward, you can pivot and adjust it exactly where you want it. It moves smoothly, but once it’s in place, it doesn’t sag or drift downward while you drive. Switching between landscape for GPS and portrait for music is super quick and effortless.
If you’re tired of cheap mounts that fall apart or drop your phone, get this one. Super solid, super convenient, and totally worth it!
Great phone holder!
Great phone holder! Feels very well made. Be warned as the sticky side is very sticky! I tried it on a varnished table and it took some of the varnish off. I think it’s probably best to stick it on something (like in the car) and leave it there. It comes with 2 magnet rings which is good if you share a car with someone. Might be nice to have another one actually in case there are more people sharing. Although if you have specific phones it should work without the magnetic part. I’ve tried a few different phone holders and this is definitely better than some of the others that fall off virtually instantly or others you have to almost super glue on! Really like the sleek design. My previous one was very bulky.
Strong holding powe
I like it. This mount seems to work well. I have an iPhone 16ProMax, and a Jeep Grand Cherokee. Placing the mount on the mostly flat top of dashboard, it holds my phone in landscape or portrait position, without obscuring any vents, or blocking any vision through the windshield. It has been surviving full sun summer heat without coming loose. I have not tried to move it and reapply, I stuck it down, just once, and treat it as permanent.
I couldn’t be happier with this mount. It arrived quickly, was easy to set up, and the magnet is incredibly strong, it holds my phone securely, even while driving over bumps. I also love how smoothly it swivels, making it easy to adjust to the perfect viewing angle.
One thing I didn’t expect is how useful it is outside the car. I use it while cooking to keep recipes or videos in view, and it’s also great when I’m working at my desk. It’s nice to have a secure place to attach my phone so it doesn’t slide around or end up falling under the car seat. Overall, it’s a versatile, well-made product that I would definitely buy again. Highly recommend!
Hlt fast zu gut
Hlt wirklich gut. Eigentlich fast zu gut. Ist manchmal schwer abzubekommen. Zb auf Holz reisst der Statik Fasern aus.. alber auf Glas, Armaturenbrett und hnlichem ist die Halterung zu empfehle
This is a solid product. Made of quality materials and full functionality. It has an amazing grip with most surfaces and the magnet is very strong. My favorite thing about it is the extra magnet rings they give you separately. For the money, you get a great value. The design is perfect for any vehicle and easy to use.
Sticks really good for sure. Only thing is the arm is starting to loosen up already, not too bad but a lil. I do have a pretty heavy phone and case but I also drive a diesel and the bumps are way more dramatic than in a regular vehicle. I would recommend giving it a shot, just make sure to angle it where the arm doesn’t just go up and down or it will start to give