YMOO 2.4GHz Wireless Audio Transmitter and Receiver (1 TX+2
YMOO 2.4GHz Wireless Audio Transmitter and Receiver (1 TX+2 RX) for Two Powered Speakers, 20ms Ultra Low Latency HiFi Audio, 320ft Range RCA Jack Wireless Adapter for TV/PC/CD Player/Home Stereo
- 【 】 YMOO wireless transmitter receiver kit support RCA input and 3.5mm output, can easily connect with your TV,DVD,transfering audio wirelessly to TWO powerful active speakers,soundbars.Transmitter is for your TV/PC, Receiver for your powered speaker.wireless transmitter and receiver will automatically turn on and automatically connect.
- 【 + 】YMOO wireless transmitter and receiver use 2.4GHz technology, within antennas can reach 320 feet (100m without any wall or floor) and 60 feet (15-20m) across one or two wall.TWO receivers make it get 100m range wireless.You can connect with two powered speakers at the same time. Enjoy silk like fluente and DUAL powerful sound music throughout the house without worrying about audio loss or signal drop-off.
- 【 . + , 】Both wireless transmitter and receivers are equiped with 3.5mm and RCA male to male Jack, . . You can connect them with any powered speakers with 3.5mm aux and RCA input.
- 【 】 Supported by 2.4GHz transmission technology, YMOO wireless audio transmitter and receiver delay is less than 20ms. Streaming high-quality audio up to 24bit, eaqual to CD quality, even better. Transimission sound is clear, stable, noise-free, and audio synchronization. Strong anti-interference technology no matter at home or office, you can enjoy excellent audio quality.
- 【 】Abosolutely the dream solution for wallmount powered speaker or powered backyard speaker cables messy. A wireless audio transmitter and receiver provide you the best solution to connect your TV / PC / MP3 /powered speaker and your home stereo wirelessly. Dual RCA cables are not included. DO NOT SUPPORT HDMI.
- 【Note】The product Works with powered speakers, amplifiers, AV receivers, and home stereo systems. Passive speakers require an external amplifier and cannot be connected directly.
Signal Channel ! No Signal Interference
YMOO RT5066 support24bit Hi-resaudio decoding, bring you true HiFi listening experience
Does YMOO RT5066 can work with any kind of passive subwoofer/rear speaker/passive speaker ?
We don't suggest using for subwoofer because passive subwoofer/rear speaker/passive speaker needs high power.there will have noise or distortion when using to them
How do I put the RT5066 transmitter and receiver into pairing mode?
Nothing needs to do
Just power on all three
They will pair automatically
LED will stays on when all paired successfully
How RT5066 to work with amplifier?
two ways:
1, TV/PC— RT5066 Transmitter . RT5066 Receiver — amplifier—passive speaker(perfect)
2,TV/PC—amplifier—RT5066 Transmitter . RT5066 Receiver — Powered speaker(volume will be low.Need to change audio from TV or amplifier to solve)
How to reset to pair?For example,one receiver is paired,other do not.how to solve it?
if one receiver do not pair.Do some DIY as following:
Open the transmitter through screw back.
There are three keys. press the key inside or left side.
When receiver LED will stays on blue.that means it has paired successfully
Why the distance can not reach to 100m?
The distance will be effected by obstacle
Wifi router can effect the distance.Please stay away from it
100m wireless distance without any wall or floor
10-15m cross one or two wall
zero cross three walls/ one floor
How to solve pairing case
The way to pairing transmitter and receiver
- normally,when both transmitter and receivers charged,they will pair automatically.LED of them will stays on blue
- if transmitter do not pair,please press the button of the transmitter untill LED off.and then press until on,they will pair automatically
- if receivers do not pair,please press the button of both transmitter and the falshing receiver untill LED off.and then press until on,they will pair automatically
- if it still do not work,please open the back of transmitter as video shown
The way to pairing transmitter and receiver
RT5066 Shown
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.3 in 1 Wireless Audio Transmitter and Receiver
| SKU: | B0C2BPW6M9 |
| Weight: | 0.81 Kilograms |
| Dimensions: | 3.96"L x 0.93"W x 4.84"H |
| Brand: | YMOO |
| Colour: | Black |
| Manufacture: | YMOO |
| Colour: | Black |
Product description
YMOO RT5066 support 24bit Hi-res audio decoding, bring you true HiFi listening experience
Does YMOO RT5066 can work with any kind of passive subwoofer/rear speaker/passive speaker ?
We don't suggest using for subwoofer because passive subwoofer/rear speaker/passive speaker needs high power.there will have noise or distortion when using to them
How do I put the RT5066 transmitter and receiver into pairing mode?
Nothing needs to do
Just power on all three
They will pair automatically
LED will stays on when all paired successfully
How RT5066 to work with amplifier?
two ways:
1, TV/PC— RT5066 Transmitter . RT5066 Receiver — amplifier—passive speaker(perfect)
2,TV/PC—amplifier—RT5066 Transmitter . RT5066 Receiver — Powered speaker(volume will be low.Need to change audio from TV or amplifier to solve)
How to reset to pair?For example,one receiver is paired,other do not.how to solve it?
if one receiver do not pair.Do some DIY as following:
Open the transmitter through screw back.
There are three keys. press the key inside or left side.
When receiver LED will stays on blue.that means it has paired successfully
Why the distance can not reach to 100m?
The distance will be effected by obstacle
Wifi router can effect the distance.Please stay away from it
100m wireless distance without any wall or floor
10-15m cross one or two wall
zero cross three walls/ one floor
How to solve pairing case
The way to pairing transmitter and receiver
- normally,when both transmitter and receivers charged,they will pair automatically.LED of them will stays on blue
- if transmitter do not pair,please press the button of the transmitter untill LED off.and then press until on,they will pair automatically
- if receivers do not pair,please press the button of both transmitter and the falshing receiver untill LED off.and then press until on,they will pair automatically
- if it still do not work,please open the back of transmitter as video shown
The way to pairing transmitter and receiver
RT5066 Shown
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.3 in 1 Wireless Audio Transmitter and Receiver
Purchased this to wirelessly transmit out from my Sony home theater “Zone 2” RCA jacks. At 2.4Ghz signal and sound are very clear. There is a tiny bit of signal delay. You really have to listen for it. Other than that it’s not really noticeable. I tested both receivers simultaneously around my property. I went as far as could. About 200ft out to where my pool equipment is and 150ft to the furthest bedroom in my home with excellent results. I could easily broadcast out to my garage and driveway if needed. For my use, #1 receiver is hooked up to a HiFi mini amp and speakers about 30ft away in another room. #2 receiver is hooked up to my outdoor pool stereo receiver about 40ft away and outside my home. Both work great and I can’t hear any music lag at such distances. I can pretty much play music on my main receiver and broadcast it throughout my home.
Party friendly
Setup was easy. I bought 2 of these kits to spread around the house for a party. They all talked to each other without issue. The rooms were spread out enough I did not hear lag and didn’t notice any quality issues amongst the typical party noise level.
Consigliatissime
Le ho usate in varie occasioni anche su piani diversi, non ho mai sentito una minima interferenza e un audio veramente integro, come se le casse al mixer fossero collegati via cavo… Davvero un ottimo prodotto con questi trasmettitori Wi-Fi risolverete alla grande il problema di lunghi cavi, e dove farli passare.
I now actually own 3 sets and use them to bridge large areas. I’ll send the signal to one speaker as receiver input and use the output of the speaker as transmitter to further continue the signal. So far, it’s worked amazing, with the exception of a very large (10,000 sqft) warehouse style business expo. I really struggled there (I only owned 2 at the time and there were way too many devices in the building).
In this video example, I am outside on a main terrace and xlr hard wired my first 2 speakers (I ran mono with my left as the main speaker). I sent sound to 2 speakers in a room across the terrace with one wireless set from the output of my left main speaker using a splitter (to my right speaker and to the transmitter) and used a second wireless set to send sound into a separate room to the right of that same terrace where I placed 1 speaker, from the output of my right speaker. That room had a large glass window overlooking a rear terrace so the second receiver gave sound to a speaker in that rear terrace (I used a long xlr cable to allow the receiver to be at the window sill for best reception). The output from the speaker in the rear terrace now served as the bridge by using the transmitter of my third wireless set to send sound to a final wrap around terrace at the far rear of the building. It was flawless and compliments were received. I used a total of 9 speakers for that event in which 5 were wireless and 4 were hardwired xlr.
I was looking an audio transmitter to let two devices to work at the same time, one is a Bose Sounddock and the other one is an old Sony Home Theater in a box. The whole idea was not to get delay between this two devices playing from the same source at the same time, and it worked perfect! There is no delay, the audio quality is awesome, no noises, no low volume, it is just perfect. The best part is that I just plug the power and audio wires and everything started to play on the spot.
Great little problem solver for PA audio.
The first set I received had a faulty transmitter unit so neither receiver picked up any audio. Sent them back for exchange and the second set worked perfectly. I used them to make my powered PA system completely wireless. Transmitter sent out both Left and Right audio, receivers selected either left or right audio depending on the speaker position. Worked great minimal to no delay. Good long Distance coverage between transmitter and receiver. Would buy agai
I am using these to connect my 2 rear surround sound speakers. I have a 2-story house and it would be a lot of time and effort to try and run wires through the wall. They work decently for being wireless. I do notice some latency occasionally, but it is not too often. I looked for a blue tooth solution to my problem but could not find one to support my existing TV, amp and speaker configuration. I have the receivers about 15 feet away from the transmitter and the sound is clear unless it gets extremely loud and then there is a tiny bit of static. I have one receiver for each rear speaker and setting up was easy. I would recommend these to a friend.