LED Trailer Light Kit, IP67 Submersible Trailer Lights 12V
LED Trailer Light Kit, IP67 Submersible Trailer Lights 12V DOT, Stop/Tail/Turn Boat Trailer Lights with 13.7″ ID Bar, 6 Marker Lights, 25 ft Protective Wiring Harness, License Plate Bracke
- 10-Piece Complete LED Trailer Light Kit – Everything Included: Get everything in one box – 2 square stop/tail/turn combination trailer lights, 6 marker lights (2 red + 4 amber), 1 x 13.7" 15-LED ID light bar, 25ft protective wiring harness with 4-flat plug, license plate bracket, and all mounting hardware. Complete led trailer light kit for utility trailers, boat trailers, cargo trailers, enclosed trailers, RVs, and trucks.
- True IP67 Submersible Rating – Built to Outlast Every Boat Ramp: Standard boat trailer lights fail after one season because they are not truly sealed. These submersible led lights use sonic-welded construction and full epoxy-encapsulation to achieve a certified IP67 rating, submerged up to 1 meter. Built-in drainage ports expel trapped moisture before saltwater corrosion starts. Whether launching at the ramp or driving through heavy rain, these submersible trailer lights keep working when others go dark.
- DOT Certified & Maximum Safety – These led trailer lights meet all Federal Motor Vehicle Safety Standards. Each light delivers stop, brake, turn signal, tail, running light, side marker, clearance, and license plate illumination. Trailer marker lights and trailer side marker lights are visible from every angle – keeping you legal and safe on highways, back roads, and boat launches. Compatible with utility trailers, cargo trailers, and enclosed trailers.
- Upgraded 25 ft Protective Wiring Harness – Built to a Higher Standard Than Typical Trailer Wiring Kits: Most trailer light kits ship with bare PVC wire that cracks and corrodes within a season. This trailer wiring harness uses a heavy-duty braided protective sleeve resisting abrasion, UV, and road debris, paired with anti-corrosion tinned-copper connectors and a pre-wired waterproof 4-flat plug. Premium materials, built to outlast standard wiring – the difference is visible the moment you hold it in your hands.
- Universal 12V Fit – Utility, Boat, Cargo, RV, Flatbed and More: Works with virtually any standard 12V trailer wiring setup. A complete solution for utility trailer accessories upgrades, boat trailer accessories replacement, and full rewires on cargo trailers, enclosed trailers, flatbeds, and campers. Bright LED technology delivers instant-on illumination, lower power draw, and a lifespan that far outlasts incandescent bulbs. Luces LED sumergibles para trailer y remolque, compatibles con la mayoria de vehiculos de 12V.
From the brand
-
Lcrslitx LED Trailer Lights
What makes our products unique?
At Lcrslitx, we believe trailer lighting should be complete, durable, and simple to install — not an afterthought.
Here's what sets us apart:
MOST COMPLETE KIT ON THE MARKET — Our kit function as tail lights, side markers, LED bar, wiring harness, bracket, and hardware. No extra purchases needed.
| SKU: | B0G3WTPW32 |
| Brand: | Lcrslitx |
| Colour: | Red |
| Manufacture: | Lcrslitx |
| Colour: | Red |
From the brand
Lcrslitx LED Trailer Lights
What makes our products unique?
At Lcrslitx, we believe trailer lighting should be complete, durable, and simple to install — not an afterthought.
Here's what sets us apart:
MOST COMPLETE KIT ON THE MARKET — Our kit function as tail lights, side markers, LED bar, wiring harness, bracket, and hardware. No extra purchases needed.
Great value and quality.
Good value, quality and complete kit. Easy to install. I purchased to replace the rear lights and add the license plate bracket, but ended up replacing the whole thing, harness and all. In order to connect to the marker lights, you will have to cut into the wire loom and into one of the brown or yellow wires that was annoying but easily accomplished. Also, I used the license plate bracket backwards and had to heat up the bend in the bracket to angle it to my needs, but again, that easily accomplished and doable.
Good quality LED trailer lights
Very good build quality trailer lights that should last years. I installed this kit on my steel, two rail, dirt bike trailer and installation was a breeze and everything fit well. Wiring is good quality and should hold up to water and elements well. You get a lot more goodies in this package compared to auto store light kits for about the same price. Recommended.
Perfect Replaceme
This LED trailer light kit was a great upgrade for my aluminum boat trailer. Installation was straightforward, and everything I needed was included in the kit. The 25-foot wiring harness gave me plenty of length to route everything cleanly, and the protective covering added some extra confidence for long-term durability.
The lights are bright, clear, and easy to see, which is exactly what you want for stop, tail, and turn signals. I also really like that they’re IP67 submersible, since this is going on a boat trailer and gets exposed to water regularly. After installation, everything worked exactly as expected.
The included marker lights, license plate bracket, and ID bar made this feel like a complete package instead of having to buy extra parts separately. Overall, this is an excellent value for the money and a solid choice if you want dependable trailer lights for a boat trailer.
Really nice wiring harness makes it easy to pull the wires
Show me a set of trailer lights that “last forever” and I’ll show you a liar. That being said, I really like the sheathing on the wire and this could prove to be the exception. Trailer lights typically fail at one of 2 points, Where the wire connections are, or inside the trailer tube where the wires rub as they bounce down the road. The sheath that holds the wires is going to help a ton with preventing these wires from wearing thin. This came with heat gun solder connectors, I’ve used these before, they’re generally great but from a mechanical standpoint, in a high vibration environment you really should be using crimp connectors and then marine heat shrink over them.
Hardware that the kit comes with are sheet metal screws, which are “fine” but I would have preferred to see machine screws with nylock nuts. Sheet metal screws tend to back out or snap a lot of the time when driving them through any steel trailer beams, and they seem to create a catalyst point for rust.
The lights themselves are really nice, I love the marker lamps and the rear “3rd brake light” bar. I don’t think they’re necessary… but they definitely look cool. The wires ends all come pre tinned which will help with corrosion.
I would buy this again, just for the wiring harness having a sheath over it, and the light quality. From that standpoint it’s an incredible value, this is the reason for 5 stars. Just some small tweaks to make this an absolutely incredible kit. If you’re the kind of person that is ordering this kit to install yourself, you likely already have the correct crimp connectors, and machine screws to make this kit a long lasting fix or addition to your trailer.
Really Nice and Strong Set Of Trailer Liighhts
Review: Upgraded Submersible LED Trailer Light Kit (IP67)
This comprehensive LED kit is an all-in-one solution for anyone looking to overhaul their trailer’s lighting system. Whether you are dealing with a boat trailer that hits the saltwater regularly or a utility trailer that sees heavy highway use, this “upgraded” set provides significant visibility and durability improvements over standard incandescent setups.
Waterproofing and Durability
The IP67 rating is the standout technical feature here. It indicates that the units are completely sealed against dust and can handle being submerged in water up to 1 meter deep for 30 minutes. For boat owners, this is critical; the ultrasonic welding and “glue-filling” process used in these upgraded kits prevents the common “burnt bulb” syndrome caused by water seeping into the sockets during a launch.
Visibility and Safety Components
13.7″ Identification (ID) Bar: This is a major safety upgrade. Mounted in the center, it clearly marks the width and presence of the trailer to following drivers, which is often required by law for trailers over a certain width.
6 Marker Lights: While many basic kits only provide two, having six (typically 4 amber for the front/sides and 2 red for the rear/sides) ensures 360-degree visibility.
LED Technology: These LEDs are significantly brighter than traditional bulbs while drawing far less amperage. This means they won’t strain your vehicle’s electrical system and are instantly visible even in direct Florida sunlight.
Installation and Wiring
The kit includes a 25ft protective wiring harness, which is generous enough to accommodate most long-haul boat or utility trailers. The wires are color-coded to industry standards:
White: Ground
Brown: Tail/Running Lights
Yellow: Left Stop/Turn
Green: Right Stop/Turn
The “protective” jacket on the harness is a nice touch, as it adds a layer of abrasion resistance against the metal frame of the trailer, reducing the risk of a short circuit over time.
Performance in Marine Environments
Because these are designed for marine use, the housing materials are typically corrosion-resistant. The move to LED also eliminates the “thermal shock” that happens when a hot incandescent bulb hits cold water—a common cause of light failure at boat ramps.
Summary
This kit is a “set-it-and-forget-it” upgrade. It covers all your DOT requirements (Stop, Tail, Turn, and Clearance) while offering the peace of mind that your lights won’t quit the moment they touch the water. It’s an excellent value for a full rewire project.