Insta 360 X5 Invisible Dive Case Pro, Waterproof Up to 50m (164ft) Splash Prevention Housing, Underwater Dive Protective Shell for Insta360 X5 with Bracket Accessories

• 【APPLICABLE】The invisible dive case Pro for Insta360 X5, Completely invisible design that allows full 360° underwater shots, Ideal for diving, surfing, snorkeling and other water sports activities. Before using the accessory, please ensure that your camera firmware, Insta 360 APP and Insta 360 studio are all updated to the latest versions for best compatibility and image quality
• 【WATERPROOF】Use Insta 360 X5 invisible waterproof housing case PRO, very good sealing performance, Water resistant to 50 M. you can take your 360 X5 action camera up to 50m (164ft) deeper underwater. When diving, it is recommended to use the accompanying counterweight, which has characteristics similar to a hot key self-adhesive buoyancy regulator and can effectively enhance buoyancy. Use the three prong adapter and locking screw to connect the dive case to the counterweight, then mount your camera to your selfie stick for the best invisible stitching effect
• 【LENS MATERIAL】underwater diving shell PRO for Insta360 ONE X5 is adopts Using optical imaging tempered glass, the light transmittance of the lens is more than 99%, the surface of the lens is smooth and flat, Custom pro grade glass boosts picture clarity and detail when shooting underwater. When diving you have to use two of the fog protectors on each side
• 【AFTER USE】After rinsing the inside of the dive case with clean water, we recommend wiping the light shield in the inner side of the lenses with a clean towel. Afterwards, open the case and leave it in a dry, well ventilated area to air dry, Ensure the light shield is completely dry with no water droplets remaining on the inner lenses, to prevent fogging
• 【THIRD PERSON PERSPECTIVE】Use invisible dive case for Insta360 X5 with the invisible selfie stick for awesome third-person views

Instructions for Use: Insta 360 X5 Invisible Dive Case Pro

Step 1 open the dive case. Slide open all four latches upward to release the top cover.

Step 2 insert anti fog inserts place the anti fog inserts on the inner walls of the dive case to help reduce fogging.

Step 3 insert the camera. Remove your cameras lens guards. If you’re using them, place the camera into the case with the screen facing up, ensuring the buttons and lenses are properly aligned.

Step 4 close the. The dive case close the top cover and fasten all four latches back onto their hooks until you hear a click to confirm it is securely locked.

Step 5 dive mode activation when the camera is powered on closing the top cover will automatically detect your dive case PRO and enter dive mode.

There’s no need to manually set this accessory up while diving. You can control the camera using the power button and quick button.Long press power button power on off single press power button switch shooting mode single press que button, start photo or video capture double tap q button during preview switch between 360 front view, 360 rear view wide angle front lens wide angle rear lens,you can also go to the accessory list in the cameras quick menu to customize button functions to suit your.