Category: Auger Accessories - Page 2

BDI Wear Part Assembly Bolt-on Spiral Point Auger+4 Pcs 3

BDI Wear Part Assembly Bolt-on Spiral Point Auger+4 Pcs 3 Point Auger Cutting Edge for Most Heavy Duty 3 Point Post Hole Digge Complete Kit: Tired of your spiral point snapping off in rocky or frozen ground? This kit includes a bolt‑on spiral point auger pilot tip + 4 cutting edges + matching screws. Precision Dimensions: The pilot tip has a 1‑7/8" shank diameter, 3.5" max width, and comes with a 3.78" carriage screw – designed for 6‑24 inch augers with a 2" ID tube and bolt‑on tip receiver. The cutting edges are 3.15"×1.97"×0.67". Perfect fit for most heavy‑duty 3‑point...

23" Auger Shaft Screw and Auger Motor Bushing for Pit Boss Pellet Grill Pit Boss Auger Replacement Compatible with 1000

18.5″ Pit Boss Auger Replacement for Pit Boss 700 Series

18.5″ Pit Boss Auger Replacement for Pit Boss 700 Series 74079 31893 Pit Boss Auger Compatible with Pit Boss 700 Series pellet grills (700T1, Navigator 700, etc.) Compatibility: 18 1/4" Auger Shaft Screw Kit Replacement Parts is Compatible with Pit Boss 700 Series Pellet Grills, fit for models: Classic, 700D, 700FB, 700NC Nascar Edition, 700S, 700SC, Laredo, and Rancher. Replacement Parts Number: 74079, 31893. Function: Feeds wood pellets into the burn pot to keep your grill running properly and restore normal feeding performance. Quality: Heavy-duty construction designed for long-lasting use under high heat and frequent grilling. Installation: Direct replacement for...

2Pcs 1/4″ x 5Ft Auger Drill Hydraulic Hose Fit for 1.8 Ton

2Pcs 1/4″ x 5Ft Auger Drill Hydraulic Hose Fit for 1.8 Ton Mini Excavator M14 x 1.5 Female to M18 x 1.5 Female Fittings, Rubber Hose Replaceme Compatible Models: 2-piece hose set designed for 1.8-ton mini excavator auger drill attachments. Suitable for equipment connection in routine operations such as trenching, drilling, and landscaping tasks Fitting Specifications Fitting Specifications: Equipped with M14×1.5 female and M18×1.5 female fittings. Compatible with common compact equipment connection systems. Please confirm size and interface type before purchase 5-Foot Hose Design: 5-foot hose designed for improved routing around equipment. Helps reduce excessive bending, tension, and twisting, supporting...

BDI Wear Part 3 Point Auger Cutting Edge, Hole Replacement

BDI Wear Part 3 Point Auger Cutting Edge, Hole Replacement Auger Teeth with Hardware for Most Heavy Duty 3 Point Post Hole Digger-4Pack Built for Last: BDI Wear Parts cutting edges are made from hardened carbon steel with an anti-rust coating, offering a stable structure that resists breaking or deforming. This significantly extends service life and saves you money on frequent replacements. Easy to Use: No more complex setups. This kit includes 4 cutting edges and matching screws. With just 2 teeth, you can quickly replace your auger bit. The simple, fast process gets you back to digging without downtime....

23-050 2 inch Auger Adapter-2″ Female Hex to 2″ Male Round

23-050 2 inch Auger Adapter-2″ Female Hex to 2″ Male Round, Heavy Duty Auger Bit Shaft Conversion Adapter for Augers, Skid Steers, Post Hole Diggers, Tractors 2 inch Auger Conversion Adapter: This heavy duty auger adapter convert a 2-inch female hex to a 2-inch male round shaft, which make different auger bits and drive units to work together seamlessly and expand their equipment's versatility Heavy Duty Auger Adapter: The two inch auger adapter forged from high-strength carbon steel and fully welded seam, which is high hardness & durable. Tough powder-coated finish resists rust, corrosion, scratches, and abrasion from mud, gravel,...

8 PCS 40/50 Degree Auger Teeth with Hardware Fit for Replace

8 PCS 40/50 Degree Auger Teeth with Hardware Fit for Replace Worn Teeth of Various Industrial and Commercial Excavating Equipment, Earth Auge Fitment:Fit for replace Worn Teeth of Various Industrial And Commercial Excavating Equipment, The dimensions are approximately 3.35 x 1.61 inches (8.5 x 4.1 cm), designed specifically for 40/50 degree ground drills Material: Made of alloy steel, impact-resistant and wear-resistant, suitable for hard environments such as rock Features: 40°/50° tooth angle optional, strong penetration, improving digging efficiency and adapting to different working conditions Installation: U-shaped mounting base design, built-in hardware, quick replacement without special tools Packaging: 8 x 40/50...

Carbide Auger Teeth, 134519 40/50 Tooth Size, Compatible

Carbide Auger Teeth, 134519 40/50 Tooth Size, Compatible with Pengo Aggressor Auger, Heavy Duty Replacement Digging Teeth- 4 Pack COMPLETE AUGER TEETH REPLACEMENT KIT: Includes 4 auger teeth (134519), 4 carriage bolts (1/2" x 1-1/2", 134677), and 4 lock nuts (134527 / 1K-6872). This complete auger teeth with hardware kit provides a fast, reliable replacement for worn or damaged teeth, compatible with Pengo Aggressor Auger and most heavy-duty auger systems for post hole digging applications. WIDE APPLICATION & RELIABLE WARRANTY: Compatible with post hole diggers and auger drill bits used in agricultural, fencing, decking, and foundation projects. Designed for versatile...

23-058 Heavy Duty Auger Adapter 2” Female Hex to 2-9/16

23-058 Heavy Duty Auger Adapter 2” Female Hex to 2-9/16” Male Round Auger Drive Adapter, Skid Steer Post Hole Digger Conversion Coupler, High-Strength Steel Auger Bit Adapte AUGER DRIVE COMPATIBILITY–23-058 auger adapter converts a 2” Female Hex auger shaft to 2-9/16” Male Round output shaft, allowing different auger bits and drive units to work together seamlessly for greater equipment flexibility. UNIVERSAL MACHINE FITMENT–Designed for auger, post hole digger, skid steer and tractor systems used in construction, agriculture, landscaping, fencing, and foundation drilling. Ideal for connecting mismatched auger drives and bits. HEAVY DUTY STEEL CONSTRUCTION–Built from high-strength steel with precision machining...

10Pcs 35 Size Spiral Drill Teeth Compatible with Excavator

10Pcs 35 Size Spiral Drill Teeth Compatible with Excavator Loader Auger Attachment for Digging Crumbly Rock, Soil, Bricks, Heavy Duty Construction Tool with Rubbe PROFESSIONAL 35 SIZE DRILL TEETH FOR EXCAVATOR AUGERS: Complete 10-piece set of heavy-duty spiral drill teeth designed for excavator and loader auger attachments. The 35 size specification ensures perfect fit for standard auger systems, providing reliable performance for professional contractors, construction crews, and DIY excavation projects. VERSATILE DIGGING PERFORMANCE FOR MULTIPLE MATERIALS: Engineered to efficiently dig through crumbly rock, compacted soil, clay, bricks, and mixed ground conditions. The spiral design provides superior cutting action and material...

Heavy Duty Auger Adapter 2″ Female Hex to 2-9/16″ Male Round

Heavy Duty Auger Adapter 2″ Female Hex to 2-9/16″ Male Round for Augers, Skid Steers, Tractors, Post Hole Diggers, Replace 23-058 【UNIVERSAL 2" HEX TO 2-9/16" ROUND CONVERSION】Effortlessly bridge the gap between different equipment standards. This heavy-duty adapter seamlessly converts your 2" Male Hex power head to fit a 2-9/16" Female Round auger bit, providing a cost-effective alternative to purchasing expensive new drive units. 【SECURE, WOBBLE-FREE CONNECTION】Engineered for maximum safety and high-torque stability. The 2" Female Hex end is precision-machined to accept a 3/4" or 7/8" pin or bolt, ensuring a rock-solid connection to your skid steer or tractor power...