UGREEN HDMI KVM Switch 4 Computers Share 1 Monitor, 4K@60Hz, 6 USB Ports Support EDID Emulation, KVM Switches, Share One Monitor, Keyboard Mouse Hard Drives Webcam, 4 USB Cables, Desktop Controlle

• NOTE: 1, Each PC must be connected with an HDMI cable (for video transfer) and a USB A to C cable (for data transfer) for normal use. 2, For stable use, please connect to the power source for power supply. 3, Not supported for use with docking station. 4, If you are connecting a laptop, please check the laptop is awakened from sleep mode before you switch. 6, HDMI cables and power adapter not included
• HDMI KVM Switch 4 Computers One Monitor: This KVM Switches allow 4 computers to share ONE monitor and 4 USB 3.0+2 USB 2.0 devices such as a set of keyboard, mouse, hard drives, U disk, and webcam, and centralize control of your 4 computers on one monitor. You can easily switch between four hosts, which not only keeps your workspace tidy but also helps to maximize productivity. NOTE: To make the USB peripherals work properly, the USB A to C data cables are required to connect from each PC to KVM
• Ultra HD 4K Resolution: This 4 port KVM switch supports the resolution up to 4K@60Hz, and can also be backward compatible with 4K@30Hz, 1080P240Hz or lower resolution. UGREEN HDMI KVM switch also supports HDMI 2.0, HDCP2.2/1.4, 3D and HDR, which makes images display more realistic, color is more bright and moving. Note: Please ensure that the resolution of the two devices at the input and the device at the output is consistent
• With 6 USB Ports (5 USB-A+1 USB-C): This usb KVM switch has 4 USB 3.0 + 2 USB 2.0 ports for sharing USB flash drives, printers, mobile hard drives, U disk, webcam and other USB devices. USB 3.0 offers data transfer speeds of up to 5Gbps, while USB 2.0 is only 480Mbps. It allows faster file and picture transfer to make work more efficient. NOTE: Please ensure that a power supply is connected while using
• EDID Eemulation & Fast Switch: No complicated software or dip switches. Enable: Press and hold the switch button 1 for approximately 5 seconds until all indicators flash 3 times, indicating that EDID emulation mode has been enabled. Your computers will retain monitor identification, resolution, and display configuration, eliminating annoying display reconnection and window rearrangement. And no more resolution drops, screen flickering when you switch sources. Actual results can vary based on system configuration, graphics hardware, and operating system
• Two Switching Ways & Wide Compatibility: By One-Botton switch or desktop controller, freely switch between 4 computers, saving space on your desk and sharing your display, keyboard and mouse between four computers. With the wired controller switching, you can place the KVM HDMI switch outside the work area, making your desktop tidier. This USB switch supports Windows, MacOS, and Linux systems. Just plug and play. UGREEN KVM switch is widely applied for enterprise, office, multimedia teaching, meeting rooms, research tests, etc

›

UGREEN HDMI KVM Switch for 4 Computers Share One Monitor

It's not a DisplayPort KVM switch.It's an HDMI KVM switch.It only supports One monitorand not support Dual monitors.

1 4K@60Hz Resolution 2 Support HDR10+

NOTE: To make the USB peripherals work properly, the USB A to C data cables are required to connect from each PC to KVM.

1 Use Comparison 2 Cable Specifications 3 Wide Compatibility

1 Programmers 2 Engineer