8BitDo Ultimate 2 Wireless Controller for Windows, Android,Steam Deck, TMR Joysticks, 1000Hz Polling Rate, Tactile/Hall Triggers, Motion Control, Programmable Back Paddle Buttons & L4/R4 Bumpers,Gree

• Compatibility – 2.4G/Wired for Windows & PC, Steam Deak, Bluetooth for Android. 1000Hz Polling Rate under both 2.4G and Wired connections.
• Connects to Switch 1/2 (2.4G only) – 1) Update the firmware to the latest version or beta. 2) With the controller turned off, hold Y and turn on the controller. 3) Connect to your Switch 1/2. Support six-axis gyro motion.
• TMR Joysticks – Offering higher sensitivity, greater precision, enhanced durability, and reduced energy consumption.
• Dual Trigger Modes – Quickly switch between non-linear Tactile Triggers and Hall Effect Linear Trigger modes to adapt to various gaming needs.
• 4 Extra Buttons – Enhance control with extra R4/L4 bumpers and PR/PL back paddle buttons, all programmable and mappable to your preferences.
• Customizable 6-axis motion control. Turbo function and Rumble vibration. Support 8BitDo Ultimate Software V2. 1000mAh rechargeable lithium battery.
• RGB – Personalize your gaming setup with three modes of RGB lighting, allowing adjustments to brightness, color, and speed.
• Rely on AKNES for exceptional customer support. Contact us anytime for assistance—we're always here to help. Visit our store page to learn more about us.

• Instructions for calibrating the joysticks/triggers?

  1. In the powered-on state,hold [LB + RB + Minus + Plus] for 8 seconds, the Status LED will blink.

  2. Rotate joysticks slowly 2–3 times. Slowly press the triggers to the bottom 2–3 times.

  3. Press the same buttons combination to complete.

• How to enable the zero-dead zone mode on the joysticks?

  In power-on state, press and hold the Minus (-) and Plus (+) buttons for 5 seconds to toggle the zero-dead zone mode on/off.

• Can I connect this controller to Switch 1/2?

  Yes.

  1. Update the firmware to the latest version or beta.

  2. With the controller turned off, hold Y and turn on the controller.

  3. Connect to your Switch 1/2.

• Is the Motion Control available on both Windows and Android?

  Yes, it can be configured as the left joystick / right joystick through the Ultimate Software V2.

• Does it support the mobile version of the software?

  No, it only supports the Windows/macOS version of Ultimate Software V2.

---

Product description

1. 
2. 

1. 
2. 
3. 
4. 

Compatibility	Windows 10 (1903) and above, Android 9.0 and above
Connectivity	2.4G – Windows, Wired USB – Windows, Bluetooth BLE – Android
Joysticks	AKNES HallPi TMR joysticks
Triggers	Tactile / Hall Effect Linear Trigger
Polling rate	1000Hz on both 2.4G and wired connections
R4/L4 bumpers & PL/PR buttons	Programmable and Mappable, Refined
6-Axis motion control	Customizable 6-axis motion control, supported on both Windows and Android, can be configured as the left joystick / right joystick through the Ultimate Software V2.

Vibration	Rotor motor vibration, asymmetric vibration
Turbo function	D-pad, Joysticks, Home buttons, L4/R4 and PR/PL are not supported
RGB Fire Ring	Fire Ring Mode, Light-tracing Mode, Rainbow Ring Mode
Battery	1000mAh built-in battery pack
Dimension/Weight	147*103*61.3 mm, 246g
Package Contents	Ultimate 2 wireless controller * 1, Charging dock * 1, 2.4G USB-C adapter * 1, USB cable (1 meter) * 1, Manual * 1
Support	Please feel free to contact our support team if you have any problems or concerns: 1) Read the AKNES store page introduction, by Amazon message. 2) Email. 3) By AKNES official web. – Contact informations there.

• Instructions for calibrating the joysticks/triggers?

  1. In the powered-on state,hold [LB + RB + Minus + Plus] for 8 seconds, the Status LED will blink.

  2. Rotate joysticks slowly 2–3 times. Slowly press the triggers to the bottom 2–3 times.

  3. Press the same buttons combination to complete.

• How to enable the zero-dead zone mode on the joysticks?

  In power-on state, press and hold the Minus (-) and Plus (+) buttons for 5 seconds to toggle the zero-dead zone mode on/off.

• Can I connect this controller to Switch 1/2?

  Yes.

  1. Update the firmware to the latest version or beta.

  2. With the controller turned off, hold Y and turn on the controller.

  3. Connect to your Switch 1/2.

• Is the Motion Control available on both Windows and Android?

  Yes, it can be configured as the left joystick / right joystick through the Ultimate Software V2.

• Does it support the mobile version of the software?

  No, it only supports the Windows/macOS version of Ultimate Software V2.