DIY Smart Car Keyless Entry Compatible with Jeep Grand Cherokee Dodge Durango 2014 2015 2016 2017 Remote Control Key Fob Replacement FCC ID: M3N-40821302 5 Buttons

• Compatibility: Key fob replacement is designed to fit Jeep｜Chrysler｜Dodge Vehicles. It is compatible with 2014-2017 Dodge Durango / 2014-2017 Jeep Grand Cherokee. This item only supports Push start Button vehicles, and it doesn't support regular keys. Please Check details for car maker, model and year
• Replacement: For FCC ID:M3N40821302;Frequency:433 MHz ;Button configuration: lock, unlock, hatch, remote start, panic. Please Make Sure That Your Original Remote Has the Same information and buttons on it
• Package: Each Package include: x2 Remote Key Fobs, x1 DIY Tool. Each remote key comes supplied with a battery, function identically to factory-original keys. Warning: Perform operation in garage or under shade. NOT readable in direct sunlight. The device is brand new and features a thin protective film on the screen. Please remove it prior to use
• Operation: Before connecting, ensure the vehicle battery voltage is sufficient. Simply plug the OBDII cable port end plugs into the car's OBD port and follow the in-screen instructions to complete the procedure. It's quick and easy to get started and can be finished in just a few minutes
• Support: Upgrade Guidelines (Try it when have any issue). There are many issues we can help resolve. If You Have Any Problems, Just Feel Free to Contact us on Amazon Anytime

This key replacement kit applicable model years are as follows

This item only supports Push start Button vehicles, and it doesn't support regular keys.

Compatible With:

2014-2017 Dodge Durango

2014-2017 Jeep Grand Cherokee

Button Funtions：Unlock ，Lock ， Trunk Release，Panic，Remote Start.

• Wear Resistant
• Higher-Responsivity
• Comfort & Convenience

STEP 1：Check model year of your car is suitable for our compatibility list；

STEP 2： Verify the FCC ID of your OEM key is the same as ours. (You can check the key's back or open the case to find FCC ID & details inside.)

STEP 3：You can ask the dealership or seller if unknown.

Our Key Information:

• FCC ID: M3N40821302, M3N-40821302 & IC: 7812A-40821302
• OE Part: 68143505AC.
• OE alternative part number: 68143505AA, 68143505AB, 68150061AB, 68150061AC.

PACKAGE INClUDED：

• x2 Remote Key Fobs
• x1 DIY Tool（With manual）

Note: Vehicle voltage must be 13V above, otherwise extra power supply is needed. Check that the supply voltage is normal.

Two methods are referenced below:

• It can be tested with specialized equipment.
• Start the vehicle and see if it works properly.

If your car has a DTC, then you first need to erase the error code for the device to work properly, our device has a function to erase the error code.

If the tool you purchased is working properly, then you can refer to the following steps

• Step 1: check that the vehicle is in good condition (e.g., voltage is normal and no DTC).
• Step 2: the OBDII cable port end plugs into the car's OBD port.
• Step 3: Select the corresponding model and year.
• Step 4: Follow the device's prompts.
• Finally, test the key to see if it works.

Upgrade Guidelines

When you use it in the process of certain problems or failures, please take a picture or other ways to record, so that we can follow up to help you solve the problem.

You may meet the following problems：

• Vehicle Linking Error
• Operating Error
• The EZK911 doesn't power up
• Other problems

So when you have any problem in the process of using, please provide as much information as possible to make it easier for us to understand.

---

Product description

When you use it in the process of certain problems or failures, please take a picture or other ways to record, so that we can follow up to help you solve the problem.

You may meet the following problems：

• Vehicle Linking Error
• Operating Error
• The EZK911 doesn't power up
• Other problems

So when you have any problem in the process of using, please provide as much information as possible to make it easier for us to understand.