Redroad S1 Cordless Pool Vacuum Robot, Pool Vacuum Lasts 130 Mins, Self-Parking, Ideal for Above/In-Ground Flat Pools up to 1100 sq.ft, Maximum Climbing Angle 18 Degrees

• SELF-PARKING: The pool cleaner robot automatically stops near the pool edge when battery runs low. The included hook makes retrieving your S1 simple without the need to get wet.
• LONG-LASTING 5200MAH BATTERY: Pool vacuum 3-4 Hour charge delivers 130-minute runtime. Cleans pools up to 1100 sq.ft, with 18° slope climbing ability.
• POWERFUL PERFORMANCE: Pool vacuum robot equipped with powerful dual-drive motors and dual water intakes ensures thorough and quick cleaning. 180μm ultra-fine filter captures microscopic debris as small as sand particles.
• CORDLESS EASE OF USE: The pool vacuum is completely cordless and hassle-free! Simply power your cleaner on and submerge it in your pool and the cleaning process automatically begins.
• COMPLETE PACKAGE INCLUDES: 1×Pool Cleaner Robot | 1×Reusable Filter | 1×Charger | 1×Retrieval Hook | 2×Scrub Pads | 1×Detailed User Manual

Power-On Operation: Long-press the power button.Note : the button requires slightly firmer pressure due to the waterproof design.Startup Confirmation: If the device is powered on without being submerged in water, it will emit an audible beep alarm to indicate successful activation.

• Why S1 Pool Robot Cleaner Doesn't Work？

  The product will Work when it is only placed in water. Short – press the button to start up the machine. If an alarm sound is triggered when not submerged in water, it indicates a successful startup.

• How should we properly store the pool cleaner if it won't be used for a long time?

  First of all, turn off the pool cleaner after use.

  Secondly, clean the bottom of the pool robot and the filter thoroughly, and let the water dry.

  Finally, fully charge the machine and then store it indoors.

• How should we troubleshoot when the robot gets stuck or stops working?

  Doesn't Turn on : Check power supply, cables, or control board

  Pump not running: Inspect pump motor

  Pump runs but machine doesn't move: Clogged filter (primary suspect) – Clean or replace filter. Remove and rinse the filter under running water

• Will it give a prompt when the cleaning is completed or when the battery is low?

  When task – completed, it auto – returns & docks against wall, no audio/light prompt.

  When battery – low, its light turns red, auto – returns & docks, no audio prompt.

• Can it be used in a swimming pool with an irregular shape? My swimming pool is neither circular nor rectangular.

  As long as it is a swimming pool with a flat bottom, there will be no problems.

---

Product Description

Power-On Operation: Long-press the power button. Note : the button requires slightly firmer pressure due to the waterproof design.Startup Confirmation: If the device is powered on without being submerged in water, it will emit an audible beep alarm to indicate successful activation.

Previous page

1. 
2. 
3. 
4. 
5. 
6. 

Next page

Previous page

1. 
2. 
3. 
4. 
5. 
6. 

Next page

• Why S1 Pool Robot Cleaner Doesn't Work？

  The product will Work when it is only placed in water. Short – press the button to start up the machine. If an alarm sound is triggered when not submerged in water, it indicates a successful startup.

• How should we properly store the pool cleaner if it won't be used for a long time?

  First of all, turn off the pool cleaner after use.

  Secondly, clean the bottom of the pool robot and the filter thoroughly, and let the water dry.

  Finally, fully charge the machine and then store it indoors.

• How should we troubleshoot when the robot gets stuck or stops working?

  Doesn't Turn on : Check power supply, cables, or control board

  Pump not running: Inspect pump motor

  Pump runs but machine doesn't move: Clogged filter (primary suspect) – Clean or replace filter. Remove and rinse the filter under running water

• Will it give a prompt when the cleaning is completed or when the battery is low?

  When task – completed, it auto – returns & docks against wall, no audio/light prompt.

  When battery – low, its light turns red, auto – returns & docks, no audio prompt.

• Can it be used in a swimming pool with an irregular shape? My swimming pool is neither circular nor rectangular.

  As long as it is a swimming pool with a flat bottom, there will be no problems.