Ride Height Adjusting Bolts for Corvettes C5 C6 C7

Ride Height Adjusting Bolts for Corvettes C5 C6 C7 1997-2019, Direct Bolt On, Pack of 4

• These reproduction stock size ride height bolts are perfect for replacing those old or work out stock ride height bolts for your Corvettes C5 C6 C7 1997-2019. These will work in both the front or the rear leaf springs
• Better Handling – The ride height adjusting bolts for Corvettes are critical components that allow you to fine-tune the vehicle's suspension geometry by raising or lowering the chassis relative to the wheels, and caster settings for performance
• Simple Installation – Soak them with liquid wrench and then soak them again, after a couple days you will be ready, unbolt the front shocks at the bottom, move them out of the way and then get on the bolts with an impact socket and a 1/2 ratchet. take the tension off the spring and work the bolt back and forth and eventually it will cooperate
• High-quality Materials – This ride height adjusting bolts made of high-quality materials, they are more durable and can maintain good performance during long-term use, making them more stable and reliable
• SERVICE: You will get a 90-day shelf life for our store. If you have any questions about ride height adjusting bolts, please contact us in time. We will reply you within 24 hours. Package contains 1 stock ride height adjusting bolts. Verify compatibility with your model before ordering, as variations in size or shape may exist.

Ride Height Adjusting Bolts
The ride height adjusting bolts for Corvettes are critical components that allow you to fine-tune the vehicle’s suspension geometry by raising or lowering the chassis relative to the wheels.

Compatible Model:
Fit for Corvettes C5 C6 C7 1997-2019

Purpose of Ride Height Adjusting Bolts:
Adjust Suspension Height – They allow precise control over the car’s ride height
Fine-Tune Handling – Lowering the car can improve cornering stability, while raising it may help with ground clearance (e.g., for driveways or track curbs).
Align Suspension Geometry – Proper ride height ensures optimal camber, toe, and caster settings for performance.

Common Locations:
– Front Suspension: Near the lower control arm or strut mount.
– Rear Suspension: On the transverse leaf spring (C4-C7) or coilover setup (C8)

Installation Recommendations
Direct Bolt On
If you are getting the “rebound” feel it is because the rubber feet are binding on the spring. Insert a pry bar between the lower control arm and the spring and pry lightly while turning the bolts. If you are getting the rusted in place feel, keep wicking lubricants down the threads for a couple of days. Sometimes it helps to try and spin a frozen bolt the opposite way you want to go to break it loose.

High Quality Materials
Made of high-quality materials for greater durability
It can maintain good performance during long-term use and is more stable and reliable

Product Packaging
2 set Ride Height Adjusting Bolts