Automotive Walnut Blaster HTS559 Walnut Blaster Kit For

Automotive Walnut Blaster HTS559 Walnut Blaster Kit For Carbon Cleaning

Automotive Walnut Blaster HTS559 Walnut Blaster Kit For Carbon Cleaning,GDI Intake Valve Cleaner,Intake Manifold&Exhaust Valve Cleaner,1400W Walnut Shell Blaster Built-In Walnut Recycling&Dust Filter

  • 【1400W HIGH-POWER MOTOR】HTS559 Automotive Walnut Blaster Utilizes an external air source and a 1400W high-power motor for strong suction, easily completing carbon deposit removal.
  • 【RECYCLING AND REUSE】HTS559 Walnut Blaster Kit For Carbon Cleaning After cleaning, the walnut abrasives can be recycled through a filter screen, achieving circular reuse and reducing costs.
  • 【WIDE APPLICATION】HTS559 Walnut Shell Blaster with 5 types of adapter fittings, suitable for the cleaning needs of most vehicles on the market.(Compatible For Au-di,Compatible For BMW.Compatible For GM.Compatible For Benz.Compatible For Land Rover.)
  • 【SPECIAL MACHINE FOR REMOVING CARBON DEPOSIT】HTS559 Engine Intake Valve Cleaner is a special machine for cleaning the carbon deposits on the intake pipe and the back of the intake valve of the automobile engine, which can deeply remove the high-viscosity carbon deposits on the intake manifold and intake and exhaust valves. After cleaning, the engine can be kept in a healthy state and ensure the efficient operation of the engine.
  • 【SAFE & EFFICIENT】HTS559 Intake Pipe Valve Cleaner Machine uses walnut sand as cleaning agent. A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive. As an eco-friendly pure natural polish material, walnut sand has advantages of hardness, pressure resistance and wear resistance. It can clean the intake pipe and backside of the intake valve thoroughly without pipes damage and corrosion.
  • 【EASY TO OPERATION】Turn off the engine before cleaning, then turn the crankshaft to close the intake valve, and use a high-pressure air pump (not included) to inject walnut powder (not included) into the intake port of the engine. The built-in dust filter of Automotive Engine Carbon Deposition Cleaner help to separate and recover walnut sand from carbon deposits, thus forming a complete cleaning closed loop.
  • 【3 YEAR WARRANTY AND LIFELONG MAINTENANCE】For the damage caused by non-human factors, we promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.

HTS559 Walnut Sand De-carbon Cleaner can deeply removes the highly sticky carbon deposits on the intake manifold, intake & exhaust valves. (Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio). 1400W high-power motor is adopted, with strong suction.

WIDE APPLICATION

HTS559 Walnut Shell Blaster with 5 types of adapter fittings, suitable for the cleaning needs of most vehicles on the market.(Compatible For Au-di,Compatible For BMW.Compatible For GM.Compatible For Benz.Compatible For Land Rover.)

1 SPECIFICATIONS 2 BUTTON DISPLAY 3 WHAT IS SAND? 4 WHAT'S DE-CARBON? 5 WHY NEED TO CLEAN?
1 SAFE AND FRIENDLY 2 DE-CARBON REMOVAL 3 HIGH-POWER MOTOR 4 RECYCLING AND RESUSE

PACKING LIST

1 x HTS559 Sand Blaster / 1 x Spray gun

2 x Spray gun nozzle / 1 x Goggles

1 x Recycle hose / 5 x Spray nozzle adaptation

2 x 1kg Sandblasting Media / 1 x User manual

OPERATION STEPS

Recommend:

1. Air pump pressure should more than 0.7Mpa(7bar/102PS1)

2. Walnut powder diameter should between 0.4-0.8mm, amountin 2-4KG(4-9LB).

3. Cleaning time between 1-3 minutes.

  • Do You Need an External Air Source?

    YES,1. Air pump pressure should more than 0.7Mpa(7bar/102PS1).

    2. Walnut powder diameter should between 0.4-0.8mm, amountin 2-4KG(4-9LB).

    3. Cleaning time between 1-3 minutes.

  • Why Choose HTS559 Walnut Sand De-Carbon Cleaner ?

    HTS559 Walnut Sand De-carbon Cleaner can deeply removes the highly sticky carbon deposits on the intake manifold, intake & exhaust valves. (Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio).

  • What is walnut powder(sand)?

    Crash walnut shell into powder, after a vigorous selection process then we get walnut sand.

  • What is carbon deposition?

    That is the black gel caused by the repeated high temperature of the engine running, which is the residual rubber in the fuel injector, the throttle valve,and other components caused by insufficient combustion of the gasoline in the cylinder.

  • Why need to clean carbon deposition?

    Carbon deposition will decrease the air-fuel ratio, cut down engine output power, and increase fuel consumption. All of them will damage the engine deeply. By removing the throttle, a carbon deposit can be seen clearly.

SKU: B0F4QYTPGG
Brand: QPKING
Model: HTS559 Walnussstrahler
Pack Quantity: 1
Manufacture: QPKING
Assembly: No
Origin: China
Quantity: 1

Product Description

1WIDE APPLICATION

HTS559 Walnut Shell Blaster with 5 types of adapter fittings, suitable for the cleaning needs of most vehicles on the market.(Compatible For Au-di,Compatible For BMW.Compatible For GM.Compatible For Benz.Compatible For Land Rover.)

Previous page
  1. 1
  2. 1
  3. Walnut Sand DE-Carbon Cleaner Machine
  4. HTS558 Automotive Intake Valve Cleaner
  5. 1
Next pagePrevious page
  1. 1
  2. 1
  3. HIGH-POWER MOTOR
  4. RECYCLING AND RESUSE
Next page

PACKING LIST

11

Recommend:

1. Air pump pressure should more than 0.7Mpa(7bar/102PS1)

2. Walnut powder diameter should between 0.4-0.8mm, amountin 2-4KG(4-9LB).

3. Cleaning time between 1-3 minutes.

  • YES,1. Air pump pressure should more than 0.7Mpa(7bar/102PS1).

    2. Walnut powder diameter should between 0.4-0.8mm, amountin 2-4KG(4-9LB).

    3. Cleaning time between 1-3 minutes.

  • HTS559 Walnut Sand De-carbon Cleaner can deeply removes the highly sticky carbon deposits on the intake manifold, intake & exhaust valves. (Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio).

  • Crash walnut shell into powder, after a vigorous selection process then we get walnut sand.

  • That is the black gel caused by the repeated high temperature of the engine running, which is the residual rubber in the fuel injector, the throttle valve,and other components caused by insufficient combustion of the gasoline in the cylinder.

  • Carbon deposition will decrease the air-fuel ratio, cut down engine output power, and increase fuel consumption. All of them will damage the engine deeply. By removing the throttle, a carbon deposit can be seen clearly.