WAVLINK 20Gbps M.2 NVMe SSD Enclosure, 20Gbps USB 3.2 Gen 2×2 Dual Bay NVMe/AHCI SSD Case, support Offline Clone, 2x4TB Expansion Storage, OTG Function, UK Plug

• [One-Click Offline Clone] Dual-bay M.2 NVMe SSD enclosure supports one-click cloning from the source disk to the target disk. To use the cloning function, the capacity of the target SSD needs to be larger than or equal to the source SSD. Before cloning, please make sure to back up the original contents of the target SSD. Be sure to disconnect the device from your computer before starting cloning.
• [Flexible Storage Expansion] The dual-bay NVMe enclosure supports two 4TB SSDs. Equipped with a USB C to C power cord, USB C to A adapter. OTG supported. With this SSD enclosure, you can connect your mobile phones, tablets, laptops, desktop computers and other devices to expand your storage capacity. DC 5V4A power adapter.
• [High Speed Transmission] USB-C supports a maximum transmission speed of 20Gbps. High-speed reading and writing speeds are 1631MB/s and 1267MB/s respectively. Just plug and play and you can quickly transfer large-capacity tasks such as pictures, videos, files, games, etc.
• [Wide Compatibility] The dual-bay SSD enclosure supports SSDs of various sizes, such as 2280/ 2260/ 2242/ 2230 and applicable interfaces, M and B+M keys. But it is not suitable for SSD with SATA or mSATA interfaces. It also comes with two silicone buckles and two thermally conductive silicone pads to secure the SSD.
• [Easy to Use] Metal sliding cover design, easy to disassemble and assemble, no tools required, plug and play, no need to download any driver. If you encounter any installation or usage problems, please contact our customer service staff.

---

Product Description

1. 
2. 
3. 
4. 
5. 
6. 

Compatibility

Systems: Microsoft Windows 10/11; Mac 10 or later; Chrome OS; Linux; Android; Harmony OS; iPad OS; iOS

Devices: Computers with USB-C or A ports that support data transmission; mobile phones and tablets with USB-C ports.

SSD slot: Support M and B+M key PCIe NVMe(target/ source disk) and AHCI(source disk) in sizes of 2230/2242/2260/2280; not support SATA or mSATA SSDs.

Note: 1. The mobile phone needs to support OTG function to connect this device to read and write SSD..

2. Please start cloning after disconnecting the connection from the computer.

3. The target disk capacity must be larger than the source disk. Please check your SSD before installation. If there are files in the target SSD, please back them up to other storage devices before cloning.

4. Source SSD slot is compatible with NVMe and AHCI, target SSD slot compatible with NVMe. Both slots are not suitable for SATA or mSATA interfaces. Please confirm your hard drive type before purchasing.

What’s in the Package? – 1 x USB-C 20Gbps Dual M.2 SSD Enclosure, 1 x USB-C to USB-C Cable with USB-C-to-A Adapter, 2 x Thermally Conductive Silicone Pad, 1 x DC 5V/4A Power Adapter, 2 x Silicone Buckles, 1 x Quick Start Guide

How to Install the SSD? 1. Push the cover in the direction of the arrow to open the top lid of the Enclosure. 2. Insert the SSDs into the slots. 3. Tear off the protective films on both sides of the two thermal silicone pads, and stick them on two SSDs respectively. 4. Reassemble the top lid in the direction of the arrow. 5. Connect the USB-C cable to the Host. 6. Finally, plug it in and it’s ready to use.