30-0300 X Series Wideband UEGO Air Fuel Ratio Gauge 52mm

30-0300 X Series Wideband UEGO Air Fuel Ratio Gauge 52mm (2-1/16”) with 4.9 LSU Sensor, Wideband O2 Control Sensor Kit, Upgraded Digital Afr Controller | 0-5v & Rs232 Output

• 【Widely Compatibility】 Wideband Air Fuel Gauge has a 52 mm (2-1/16 inch) Gauge Housing, this Digital Wideband Gauge can be easily installed in most instrument pods. Our X Series Wideband UEGO Air Fuel Ratio Gauge have 0-5V & RS232 output, which can be used with data loggers and almost all engine management systems, compatible with vehicle/system voltages up to 16V.
• 【Trustworthy Quality】Accurate A/F Ratio Data is crucial when adjusting the engine. Featuring X-Digital wideband technology, which enables these controllers to read and report values more faster that other controllers cannot, providing more optimized engine tuning and a safer overall operating condition – Display AFR values in hundredsths of %. Note: Free air calibration is not required when used with our Wideband O2 UEGO AFR gauge.
• 【Feature】Upgraded New Air/Fuel Ratio UEGO Gauge wideband O2 AFR Gauge features a digital LED display and LED "needle" that change color as the AFR goes from rich to thin. At the same time, the AFR Gauge can be switched between 3 display modes: air-fuel ratio, lambda, and oxygen percentage, which means that you can monitor your vehicle condition accurately, efficiently and quickly.
• 【2 Calibration Modes】Resistor Trim Mode(rCAL) or Free Air Mode(ACAL)? It is up to you! The supplied UEGO Sensor is factory calibrated via a trim resistor, integral to the sensor connector, and rCAL is the recommended calibration mode for best accuracy, for most users, there is no further action or calibration required. The gauge features a modern, visually striking faceplate and new seven-segment, center display that is 87% larger than previous generation.
• 【Easy For Installation】Wideband meters have a 52mm housing and are supplied with brackets and thumbscrews for easy, plug-and-play mounting to panels or gauge pods. It is recommended that the gauges need to be securely mounted with the brackets provided to ensure they do not come loose. Installation instructions are included to assist you with the installation and wiring procedures.

Air Fuel Ratio Kit Specification:

Technology: Upgraded X-digital technology

Sizes: 52mm (2-1/16 inch) gauge housing and slim 0.825” gauge depth

Material: Carbon fiber guage housing

Support: 4.9 LSU wideband sensor included

Modes: Free air or resistor trim calibration modes

Voltages: Compatible with vehicle/system voltages up to 16V

Range: 8.0:1 to 20.0:1 AFR/0.55 to 200 Lambda

Value: Can display AFR values in hundredths of %

Accuracy: Configurable 3 or 4 digit precision display model

Display: Lambda, AFR, O2% display modes with reversible faceplate

Connector: Locking connectors

Lighting: Auto dimming feature

Analog Output: 0-5V Analog Output, (CAN bus) Output, RS-232 Output

Package:

1 * UEGO Gauge Assembly

1 * UEGO Sensor

1 * PWR/IO Cable

1 * Sensor Cable

1 * Silver Nut

4 * Butt Connectors

1 * Installation Instruction