HQUA PN03DC 12V AC LED RGBW Color Change Inground Pool Light, 10 Inch 35W 3000lm (300W Incandescent Equivalent), with 100” Electric Cord, Fit for 10″ Large Wet Niches, No Transformer Included.

• RGBW Color Change Light. With the M4-3A control system, PN03DC provides at least 12 different color modes, flashing, jumping change, and single color included. With the new pair up, one remote could control 5 lights at most. In White mode, it provides the same light as the 300W incandescent light. 10% energy bill, 100% illumination.
• Great option to replace the pool lights existed. This model PN03DC pool light contains face ring, pilot screw, led light assembly, 100’ electric cord, 12V AC to 12V DC LED driver, and M4 Remote controller system. Fit for large 10” standard wet niches. It charges 12V AC as the power, there is no transformer included in this system.
• This is an all-in-one LED light. All SMD LEDs are soldered in the light fixture. No place and no need to disassemble the light and install a bulb in it. You could either use the old electric cords (5C 22AWG) or our new cords in the installation. 12V-15V AC power needed depending on the how much cords did you use between the power and the light.
• Excellent Electrical Safety, SELV and Dual waterproofing. 12V AC Power needed, the LED driver in this system would change 12V AC to 12V DC, which is 100% safe for the human body. Dual waterproofing, the fixture shell is waterproof. The SMD LEDs are waterproof since they are sealed by a special transparent layer.
• Installation: A wet niche/housing needed. Fit for standard 10 inch wet niche with a 12 o'clock pilot screw and 6 o'clock notch. We list the most popular niche/housing models in the below . Light Fixture Size: 10“✖4”✖3“, 10" diameter of the face ring, 4" diameter of the back housing, 3" deep. Please inspect to see if our product could fit for your pool.
• ×××Connection to 120V AC is prohibited××× You might need to purchase another pool light transformer that helps 120V AC change to 12-15V AC if you want to use this light with 120V AC power.

---

Product Description

A few notices for the installation: The correct connection is : 110V-120V AC to GFCI to Your Pool Light Transformer(Which is not provied in this product), it would provide 12V-15V AC to PN03DCD, and PN03DCD would change 12-15V AC into 12-15V DC and power the M4-3A controller, after that, RGBW wires would transmit through 100′ electric cord to the LED light. The LED light needs a wet niche to be installed in. We don’t provide a niche/housing for the concrete/vinyl/fiberglass spas. If you need purchase a niche/housing for this product. Please consider the brands and part numbers listed above. Follow all the requirements about the dimensions above to get a better performance and avoid potential damage. Leave enough electric cords behind the light in the niche is very important to change the replacements and maintain this product. Tags: Car