Universal Scissor Car Jack, Load 2.5 Tons, Lifting Height 10-39CM, with Tow Rope 2M, Wrench*2, Gloves, Tyre Repair Tools Kit for Car Van Sports Utility Vehicles

• 【Jack Size】Car scissor jack size 41.5*9CM, lifting height 10-39CM, cross labor-saving wrench 34*2.3cm, thickness 1cm; retractable four-hole wrench 35-48cm, equipped with 2 sockets (size 17mm/19mm, 21mm/23mm) , towing rope 2M
• 【High Load】The jack is made of high-strength steel plate with strong load-bearing capacity and can bear 2.5tons of weight
• 【Effort-saving Design】The jack adopts a reverse double-threaded rod design, which is more efficient during operation than the traditional single-threaded rod, saving you effort
• 【Easy to Operate】The jack is equipped with a labor-saving wrench and a retractable four-hole wrench, making it more convenient for you to operate
• 【Wide Range of Use】2.5 ton scissor jack suitable for cars, caravans and vans. It is very suitable for use as a vehicle in emergency situations or breakdowns. It is strong and stable, non-slip, not easy to rust, and safe to store

›

Instructions for use:

• ① Before lifting, park the vehicle on a level and hard road surface, tighten the handbrake to prevent the wheels from moving, and turn on the hazard warning sign.
• ② Block the wheel diagonally opposite the replacement tire and loosen the replacement nut, but do not unscrew it
• ③ Take out the jack and use a rocker or wrench to raise the jack to the appropriate height.
• ④ Place the jack under the lifting part specified by the automobile factory, turn the handle clockwise to make the jack saddle contact with the lifting part, and check whether the contact is safe and reliable.
• ⑤ Then shake the handle to lift the vehicle to the appropriate height, replace the tire and tighten the nut

Notes on use:

• 1. Do not overload;
• 2. To ensure the normal use of the jack, please keep the threads of the jack clean and lubricated. Please apply enough oil on the screw before each use;
• 3. This product can only be used for support and cannot be used as a fixed support. It is strictly prohibited to enter the bottom of the vehicle when supporting it;
• 4. If there is any skew during the support process, stop using it immediately and adjust the position before using it again.