Streetwize Super Capacitor Jump Starter 2-10 mins Recharge with Type C Charger 1500Amp Peak for Petrol and Diesel Engines (Both Up to 8000cc) Car Battery Booster Emergency Portable Power Pack (SWPP21)

• The 4TRESS supercapacitor emergency jump starter helps you get out of a bad spot when your car is not igniting because of a flat or low battery. With this emergency jump starter, it removes the need of asking another motorist to jumpstart your car.
• 4TRESS SWPP21 car starter has a peak current of 1500 Amp. Both diesel and petrol vehicles (both up to 8000cc) can be started in minutes. This includes cars, motorcycles, RVs, tractors, trucks and more. You can put the car's jump starter in the car for what the car needs.
• What’s more this emergency jump starter is unlike standard emergency jump starters on the market as it does not come with a built-in battery so that you don’t have to charge the product before first use.
• The USB port on the unit can be used to power or charge USB devices such as smartphones, tablets, and USB LED lights. Simply connect your device to the unit 's charge port and press power button.
• Please note that this product is for jump starting your vehicles. It is NOT suitable for recharging your vehicle’s battery.

›

Introducing the 4TRESS Super Capacitor Emergency Jump Starter, a revolutionary device designed to provide a quick and reliable solution for starting your vehicle in emergency situations.
Unlike traditional jump starters, this product doesn’t come with a built-in battery, eliminating the need for pre-charging.
Instead, the capacitors inside the jump starter draw power directly from your vehicle’s weak battery, allowing you to use it straight away.

Technical Specification:

– Electrical Protection: High temperature, over discharge, over-charge, overload, short circuit, reverse connection protection.
– Operating temperature: -40°c to 65°c
– Capacitor spec: 2.7V 3000F x 6 pce
– Size: 222mm x 155mm x 253mm
– Net Weight: 4.2kg
– USB Type C Input: 5v/1.8 A
– USB Output: 5v/2A, 9v/2A, 12v/2A
– Peak Voltage: 15A

Performing Emergency Jumpstart

– Attach the unit’s red clamp to the positive terminal off your 12V battery, followed by the unit’s black clamp to the negative terminal of your 12V battery.
– When connection has been made, the capacitors inside the unit will draw power from your vehicle’s battery.
Once jump starter reaches full charge, the unit will show “15V 100%”.
This means the unit is ready to perform an emergency jump start.
– Once full charge has been achieved, press the power switch to begin the ignition countdown of 6 seconds.
When the six seconds timer reaches its completion, a beep will sound so that you can start up your vehicle’s engine.
– Once your vehicle’s engine has started, wait for the unit to fully charge (15V 100%) then disconnect the unit from your battery.
If the vehicle does not start, please allow for 10 seconds for the jump starter to fully discharge.
Once the capacitors have fully discharged, the capacitors inside the jump starter will begin to recharge via the battery connection.
Once fully charged, repeat step three and four.