Aukuoy Electromagnetic Joystick Replacement

Aukuoy Electromagnetic Joystick Replacement for Steam Deck: SD02 Hall Effect Sensor Joystick Module for Steam Deck Accessories, No Drift, No Soldering Needed(For MEDA and MHDA Model)

• 【High Compatibility】Before installation, please confirm that your Steam Deck Controller ID. If the Controller ID starts With "MEDA" that device uses a Type A thumbstick. If the Controller ID starts With "MHDA" that device uses a Type B thumbstick. (Settings-System-Steam Deck Controller ID)
• 【SD02 Joystick for Steam Deck】Electromagnetic Joystick module replacement for Steam Deck with Hall Effect Sensor. These sensors use magnets to detect the movement of the joystick, without mutual friction and wear, which perfectly solves the problem of insensitive, out of control and drift.
• 【Patented Low Power Technology】SD02 Joystick for Steam Deck has super low power and longer gaming time. Patented super low power design with only 50% power of original carbon film joystick. More durable and long lasting.
• 【 Note】To avoid risk of damage,before the replacementwork,turn on your Steam Deck and discharge its bat-tery to below 10%.Do not move other parts but only work on the joy-stick module during the replacement process,andfollow the ESD safety procedures during the replace-ment process.
• 【Joystick Calibration】After the joystick is installed, open the Steam Deck, press the small switch on the calibrated joystick board, go to joystick calibration interface on Steam Deck,calibration is well finished if you see the joysticks return to center position(0,0).Then you can screw the shells on and use the Steam Deck.▲: Do not touch the joystick during the process.

›

Aukuoy Electromagnetic Joystick Replacement for Steam Deck: SD02 Hall Effect Sensor Joystick Module for Steam Deck Accessories, No Drift, No Soldering Needed(For MEDA and MHDA Model)