Catering Parts UK 2 Cylinder Automatic Gas

Catering Parts UK 2 Cylinder Automatic Gas Changeover KIT for Two Propane LPG Bottles

• 1 x LPG Gas Regulator 2 Cylinder Auto Change Over Kit
• Complete Unit For Two Gas Cylinders
• Kit includes: Automatic changeover head, 6kg/hr regulator type 754C ,2 x 20" POL x W20 pigtails, Hoses have built in Excess flow & non return valves, 3/8" Male x 3/8" female outlet test point ball valve, Screws, bracket, safety sign.
• Inlet Connections: 2 x W20 (M20x1.5 male) (To fit supplied hoses)
• Input Pressure: 1.25bar – 16bar
• Output Pressure: 37mbar
• Output Rating: 6Kg/h

• Type Of Gas: PROPANE
• Diaphram Type: 754C
• Please note: Thread sizes are in BSP and are not physical measurements. The BSP value refers to the internal bore of the pipe, the physical thread size will be larger than this. For example a 3/8" BSP male fitting would physically measure approx 16mm wide (using metric). See guide on the gallery photos for further help identifying BSP thread sizing.

1 x LPG Gas Regulator 2 Cylinder Auto Change Over Kit

Cater Parts UK Part Number: COK 31

Kit Includes:

• Automatic changeover head
• 6kg/hr regulator type 754C
• 2 x 20″ POL x W20 pigtails
• Hoses have built in Excess flow & non return valves
• 3/8″ Male x 3/8″ female outlet test point ball valve
• Screws, bracket, safety sign

• Inlet Connections: 2 x W20 (M20x1.5 male) (To fit supplied hoses)
• Input Pressure: 1.25bar – 16bar
• Output Pressure: 37mbar
• Output Rating: 6Kg/h
• Type Of Gas: PROPANE
• Diaphram Type: 754C
• EN 16129 Approved

PLEASE NOTE: The hoses supplied in this kit are for connection to standard UK POL (EN 16129 G.7) screw in type propane gas bottles ONLY (see gallery pictures for more details of this fitting).

Important Note: Although these are intended for outdoor use, the manufacturer recommends they are not continuously exposed to the elements. For this reason it is suggested to protect the regulator with a cover in order to shield it from rain and prevent any damage.

To connect the outlet valve to 8mm orange lpg gas hose a 3/8″ male fulham nozzle may be required. Please visit our Amazon store to purchase this.

We do advise that any parts are diagnosed, installed and tested by a suitably qualified engineer.

Please note: Thread sizes are in BSP and are not physical measurements. The BSP value refers to the internal bore of the pipe, the physical thread size will be larger than this. For example a 3/8″ BSP male fitting would physically measure approx 16mm wide (using metric). See guide on the gallery photos for further help identifying BSP thread sizing.