AABCOOLING pack of 6 Home&Office Gas Duster Freezing Spray 400ml K5, Multipurpose Tool Circuit Freezer, Freezes Down to -50*C, Engine Cleaners, Automotive, Fluids

• ✅ Freezer Spray is a high-quality, preparation containing a mixture of ecological gases for fast local freezing in a spray down to -50*C and for removing dust from hard to reach places with a stream of compressed gas. Versatile use in electronics, automotive mechanics as a tester of electronic parts and components.
• ✅ Are you trying to unscrew a stuck or rusty screw but it does not want to move? Use our Freeze Spray Release, frost the screw connection to -50*C.
• ✅ To freeze, turn the Circuit Freezer packaging upside down. Point the application tube at the appropriate element and press the nozzle.
• ✅ The Quick Freeze is equipped with two replaceable nozzles enabling comfortable and precise work, even in hard to reach places.
• ✅ Slight car body dents can happen anywhere, e.g. during bumps, when parking. Fix it yourself for cheap with this Component Freezer!

AABOOLING Home&Office Compressed Gas Duster 750 ml Deep Freeze Spray is a high-quality, preparation containing for fast local freezing in a spray down to -50*C and for removing dust from hard to reach places with a stream of compressed gas. Versatile use in electronics, automotive mechanics as a tester of electronic parts and components.

Are you trying to unscrew a stuck or rusty screw but it does not want to move? Use our Frost Spray, frost the screw connection to -50*C. The metal will shrink under the influence of temperature, and in the case of rusty joints micro cracks will appear, which contribute to the loosening of the thread. Then you will easily undo any stuck connection. It also facilitates assembly and disassembly of tightly fitted metal parts.

Slight car body dents can happen anywhere, e.g. during bumps, when parking. Fix it yourself for cheap with Freeze Spray!

Heat the dents with e.g. a hair dryer and then cool the surfaces with AAB gas duster for about 10 seconds. You can repeat the action if there is no result. The method works only with delicate dents (not edge or sharp).

Are you a DIY enthusiast? Choose our perfect product for service applications!

You can easily find microcracks on printed circuits using the thermal method. Remember!!! The product does not conduct electricity, but during evaporation there is a phenomenon of water vapor deposition, which can damage electronic components. After freezing, blow and dry the element from moisture. Do not use the product on live equipment!

To freeze, turn the Pipe Freezing Kit packaging upside down. Point the application tube at the appropriate element and press the nozzle.

When cleaning with compressed gas, hold the can with the nozzle up. Aim the tube at the application site and pulsate the nozzle.

The Quick Freeze is equipped with one nozzles enabling comfortable and precise work, even in hard to reach places.