Watch Crystal Press Tool, Watch Back Case Closer

Watch Crystal Press Tool, Watch Back Case Closer with 18 mm to 50 mm watch back screw nails and 20 dies for close snap clock, back cover,locker, watchmaker repai

• 【SUITABLE FOR MULTIPLE MODELS】: This Watch Back Press comes with an assortment from small 20 different dies for watches of all sizes (18/20mm,21/23mm, 24/26mm,28/30mm,31/32mm,33/34mm,36/38mm,40/42mm,43/45mm,48/50mm), perfect for professional watchmakers and collectors.
• 【GOOD STABILITY】: The Watch Crystal Press Tool is made of good material that does not cause scratches and marks on the dial and watch of the watch, repair tools, high quality and a unique look. The base has four threaded holes.
• 【EXCELLENT FUNCTION】: The Watch Crystal Press is practical, quick and effortless; metal, hard and durable; durable. Both the upper and lower part are M6 thread, compatible with Bergeon 5500A / 5500C.
• 【EASY TO USE DESIGN】: This helps to press watch crystals and cubes without risking clips on the hands and on the watch itself. Made of high-quality cast iron, this watch case can remain stable when closing the watch without vibration.
• 【HIGH QUALITY】: Our watch press tool applies pressure by screwing on the top handle. This means you have complete control over the pressure you use. You can apply just enough pressure to attach the crystal or case.

● Functions:
Both the top and bottom threads are M6 thread, compatible with Bergeon 5500A / 5500C. Ideal for closing the watch case after resizing or repairing. You can press the tool by tightening the top handle. So you have full control over the pressure used. It is easy to break the watch with other tools while you consider closing the case with our tool to be desirable. The concealed configuration means that the repair person sees the case closed again.

● Instructions:
&1. Choose a cube larger than the watch crystal, and install it on the pliers.
&2. Choose another blunt smaller than the rear cover and install it on the screw cap of the clamp.
&3. Place a crystal watch under the cube and place the back cover in a suitable place.
&4. Press down slightly.
&5. If you put a cloth under the watch crystal, the watch crystal is protected.

● Specification:
Material: stainless steel + aluminium.
Colour: as shown in the pictures.
Press tool size: approx. 12 x 10 x 20 cm / 4.72 x 3.94 x 7.87 inches.
Round Size: 18/20 21/23 24/26 28/30 31/32 33/34 36/38 40/42 43/45 48/50
2 round matrices: 16/16 20/25 mm.
Square size: 20, 25, 30, 35, 40, 45 mm.
Sign Size: 37 45 mm
Weight: 1620 g.
Type: Repair Tools & Kits

Package contents:
1 x watch press tool.
20 x matrices.

Note:
The measurement error is about 2 mm. There is a slight error in the size of manual measurement. Thank you for your understanding.