From the manufacturer

Makita HR3012FCJ/2

• Recessed lock-on button
• 3 mode operation and no hammering when idling function
• Anti-vibration main handle, anti-vibration housing and AVT
• Supplied with quick change keyless chuck
• Depth gauge
• Double insulation and torque limiter
• D shaped handle with a rubberised soft grip for increased comfort in use
• 3.9 J impact energy

The HR3012FCJ/ features no hammering when idling function to help increase the service life of the tool and torque limiter to minimise gear damage by automatically disengaging the gears if the bit binds or hits against reinforcement.

30mm maximum capacity in concrete (TCT bit), 80mm maximum capacity in concrete (TCT core), 80mm maximum capacity in concrete (diamond core), 32mm maximum capacity in wood, 13mm maximum capacity in steel.

Makita HR3012FCJ/2 240V 30mm SDS-Plus Rotary Hammer supplied in a Makpac Case

The HR3012FCJ/2 is a 240V 30mm Rotary Hammer, adapted for SDS-Plus bits, supplied with a quick change keyless chuck, with a powerful 1,050 watt motor to deliver up to 4500 ipm, 840 rpm and 3.9 J of impact energy to handle the most demanding applications.

The HR3012FCJ/2 is equipped with variable speed controlled by dial and constant speed control to automatically apply additional power to the motor to maintain constant speed under load, recessed lock-on button for continuous operation and 3 mode operation for rotation only, hammering with rotation and hammering only.

The HR3012FCJ/2 is further equipped with depth gauge for increased drilling consistency, LED job light, forward/reverse rotation and anti-vibration main handle, anti-vibration housing and AVT for low vibration to reduce operator fatigue.