20-Inch Electric Bike Conversion kit|250W/1000W-LED Electric Bicycle Hub Motor 36V/48V Electric Bike Front/Rear Conversion kit Motor E-bike Conversion ki

• ⭐ 36V 250W/48V 1000W Brushless Tooth Motor Specification, Strong and Powerful
• ⭐ Comes with a powerful controller that guarantees a large power supply. Suitable for V-brake and disc brake
• ⭐ The maximum speed of the engine is 30 km/h. (36 V 250 W), The maximum speed of the engine is 50 km/h. (48 V 1000 W)
• ⭐ The open size of the front fork is 100 mm (front wheel) / The open size of the rear fork is 135 mm (rear wheel)
• ⭐ Rim size is 20″(Suitable for 20-inch bikes), crank speed sensor for pedal support

Specification:

Wheel size: 20 Inches

Voltage: 36V to 48V

Suspension type: Front/rear

Frame size: 20 inches

Engine power: 250W

Bresentype: E-Brake

Optional type: front engine and rear engine

Engine specification: 36V 250W/48V 1000W

Speed: 30KM/H (front engine) / 50KM/H (rear engine)

Open size of the front fork: approx. 100 mm to 3.9 inch

Open size of rear fork: approx. 135 mm

Brake: V-brake/disc brake

Controller: 36V 15A To 48V 130A

Support: 5-magnetic point support sensor

Brake lever: Brake lever with power cut-off

Thrush: Thumb Thrush

Display: SW-810LED display

Wiring mode: Waterproof wire for outgoing motor, common wiring for others

Note: When connecting the controller to the wires, make sure you connect the correct colors to the controller. Otherwise, the controller may be damaged.

About the battery: The power and voltage of the battery (not included) should match our set. When installing, make sure that the wiring is not switched. Otherwise, the product may be damaged.

Note: Not waterproof, please do not drive on rainy days

Package list:

1 * Engine

1 * Controller

1 * Assist

1 * Electronic servo brake

1 * Thumb-thrush

1 * LED display

1 * Waterproof wire

1 * Controller carrying bag