Commercial Ultrasonic Cleaner-DK SONIC 3L 120W
Commercial Ultrasonic Cleaner-DK SONIC 3L 120W Sonic Cleaner with Heater Basket for Jewelry,Denture,Coins ,Metal Parts,Carburetor,Fuel Injector,Record,Circuit Board,Brass etc(3L,220V).
- 40KHz Ultrasonic Frequence for Intensive Rinse: 40KHz ultrasonic frequency can be used to clean stuffs with complicated surfaces, such as blind holes and deep holes etc.
- Die-casting SUS304 Stainless Steel Tank: The inner cleaning tank of the devices is made with SUS304 stainless steel materials, and it makes the device be resistant to weak acid and weak alkali.
- User-friendly Control Panel with Simple Mechanical Controllers: The devices are equiped with two simple mechanical industrial controllers which have a long service life and make the devices be operated easily.
- Always ON or Free time setting among 0~20 minutes: Extensive time-setting range makes the device be freely set to work for any certain time based on the characters of the stuffs to be cleaned.
- 20~80°C Heating Range for Degreasing and Dewaxing: Heating function is helpful for reducing the adhesion strength of oil and wax so as to improve the cleaning effect, and generally the best cleaning temperature is among 40~60°C, i.e. 104~140°F.
SKU: | B087JFRYM6 |
Weight: | 3.57 kg |
Size: | 3L-H |
Dimensions: | 26.16 x 16.51 x 23.11 cm; 3.57 Kilograms |
Part: | DK-300H |
Batteries Required: | No |
Batteries Included: | No |
Manufacture: | Shenzhen DeKang Electronic Cleaning Appliances Co., LTD |
Reference: | DK-300H |
Size: | 3L-H |
Product Description
40KHz Ultrasonic Frequency for Cleaning Bland Holes
Under the same ultrasonic intensity, 40KHz ultrasonic wave can create more cavitation quantity, and do much better in penetration, than ultrasonic wave close to 20KHz. So 40KHz ultrasonic wave does well in cleaning stuffs with complex-shaped surface or blind holes. Especially, 40KHz ultrasonic wave causes much lower noise than ultrasonic waves close to 20KHz.
Heat to Remove Oil and Wax
Heating can decrease the adhesive strength of oil and wax to certain stuffs to be cleaned, make the cleaning solution much easiler to create cavitations under ultrasonic wave and strengthen cavitation so as to increase the cavitation level of cleaning solution, and then enhance the cleaning effect.
Note: the best cavitation temperature of water is 60 degrees celsius.
SUS304 Stainless Steel Tank and Drain Valve
SUS304 stainless steel does better in resistance to alkali solution and most organic and inorganic acid than SUS201 or other SUS200 stainless steel series. However, SUS304 stainless steel has no resistance to solution with chloridions, such as hydrochloric acid, and hydrofluoric acid.
Note: Please don't use flammable, explosive or volatile cleaning solution.
A Seperate Power Switch and A Backup Fuse
A separate power switch can ensure a longer service-life, while the fuse in the power socket can prevent the ultrasonic cleaner from being damaged by an instantaneous over-high voltage, especially there is a backup fuse in the socket which can bing the ultrasonic cleaner back to work once the fuse in use is burnt by an instantaneous over-high voltage accidently.