Intex Robot Vacuum Cleaner Gray, 31.12 x 59.37 x 33.97 Cm

• Automatic pool cleaner – It automatically sucks the bottom of the pool by venturi effect
• Automatic direction reversal for a complete cleaning of the bottom of your pool
• The 6.50 m hose connects easily to the existing nozzles of your pool with a diameter of 32 (with an adapter not supplied) or 38 mm
• The 28001 robot is compatible with filtration with a minimum flow rate of 6m3/h
• Not suitable for in-ground pools
• It must provide an adapter reference 12486 if it is a delivery nozzle with a diameter of 32mm
• Requires a filter pump with a flow rate between 1500 and 3500 gph (5678-13 248 L/h)

Robot vacuum cleaner. It is very simple to start up thanks to its Venturi system it connects to the discharge nozzle (diameter 38 mm), the water pressure makes it work and change direction every 30 to 50 seconds. The circulation of water on each side allows it to be weighted down. Rises partially to the walls.
Note

1. The self cleaner must be connected to a filter pump with a flow rate between 1600 and 3500 gallons/hour (6056 – 13248 liters/hour).
2. The self-cleaning must be connected to the outlet of the filter pump.
3. The consumer should clean the self cleaner before storage

Automatic pool cleaner is a hassle-free solution as it effectively and automatically sucks up the entire pool floor. Not suitable for inground pools, this pool cleaner has been designed for above ground pools Intex with 1-1/2in hose fittings and attaches to pool inlet connector with 24ft 7in hose.

-Requires a filter pump with a flow rate between 1,600 and 3,500 gph.

-Not suitable for in-ground pools.

Box Contains

1 x one pool cleaner