ELEGOO Mercury X Bundle with Separate Washing Station and Curing Station for Large Resin 3D Prints, Compatible with ELEGOO Saturn, Mars Series mSLA 3D Printers
REGULAR PRICE: £202.00
About this item
- This fits your .
- by entering your model number.
- 【Essential for resin 3D printing 】 ELEGOO Mercury X Bundle contains 1 washing station and 1 post-curing station, which completes your resin 3D printing experience for post-processing and allows you to wash and cure 3D prints at the same time, maximizing your throughput.
- 【Washing larger prints easier】With a 7.5Liters container, you can directly wash big parts 3D printed on ELEGOO Saturn and Mars 3 as well. Leave the prints on the build plate and set it on the hanger inside the bucket, then the parts will be washed in the stirring solvent removing all the residual resin.
- 【Improve your print quality】The post-curing station comes with 2 light bars with built-in 14 LED lights each and 4 LED lights beneath the turntable. Working with Fresnel lens, they can emit the optimal 405nm wavelength of UV light and increase the quality of the resin 3D prints.
- 【Intuitive and safe operation】ELEGOO Mercury X Bundle adopts a sleek design using a single knob. Press and hold to turn on and off the machine then rotate the knob to set an appropriate time for washing and curing. The UV cover blocks 99.9% of ultraviolet rays and protects your eyesight during post-curing.
- 【Tips and tricks】 After a model is washed, it’s better to dry it first before you put it in the curing station. For parts printed with water-washable resin, it’s better to use running water to wash and not suitable to clean them using the washing station.
| SKU: | B095WYMPRW |
| Dimensions: | 32 x 30 x 48 cm; 5.8 Kilograms |
| Manufacture: | ELEGOO |
| Origin: | China |
| Reference: | EL-3D-MXB |
Product Description
ELEGOO MERCURY X Bundled Washing and Curing Machine
After the model is printed, please clean and blow-dry the model before putting it into the curing machine.
If the model become yellow after curing, please adjust the curing time. Over curing will lead to a yellowing model.
The recommended ambient temperature is 0-40 degrees, and the ambient humidity temperature is 20%-50%.
To avoid overheating of the curing cabinet, please do not use it for more than 40 minutes at a time.
Cure Time: If model diameter less than 30 mm, the curing time is recommended to be 2 minutes. If the surface structure of the model is complex, it is recommended to increase the curing time properly.
Special Notes: The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.
———
Our Commitment ：If you have any questions or are not satisfied or need an use guide, please feel free to let us know，ELEGOO Official Service team will answer your questions within 24 hours. please send us via email or click “Ask the ELEGOO”
Your satisfaction is our goal！
The only limitation is your imagination. Print now and go with ELEGOO.
——-
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Official ELEGOO Support | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |