• 4 pieces lashing strap 5000 dan kg 6m, strap width 50 mm two-piece / strap and ratchet / handle made of metal / no plastic. Longer durability
• !!! IMPORTANT!!! Our belts are safe and officially approved for load securing / Comply with DIN EN 12195-2 / Label with all legal notices on the belt strap and ratchet
• Our lashing strap for the trailer, boat trailer or semi-trailer
• The lashing strap with ratchet is hooked in at the right and left ends. The lashing strap is pulled through the metal ratchet and tensioned with the lever until the tensioning force is reached
• INDUSTRIE PLANET stands for load securing with responsibility: Whether you are a camper, caravan driver, haulage contractor, truck driver, you will always receive very good and consistent quality from us

4 x professional lashing strap 2-part

Our belts are manufactured for us and marked with our labels (Brand and manufacturer: Oliver Kühn / Industrie PLANET)

Our belts comply with DIN EN 12195-2
All legally required information can be found on the labels

(ATTENTION: Belts are only permitted for securing the load if they comply with this DIN standard)

Total length: 6 meters (loose end 5.5 m + ratchet end 0.5 m)
belt width: 50 mm
Standard claw hook
Manual force SHF: 50 daN (50 kg)
Preload force STF: 400 daN (400 kg)
Tractive force LC straight: 2 500 daN (2.5 tons)
LC strapping tensile force: 5 000 daN (5 tonnes)
Colour: orange
Material: Polyester
Label with certificates and standards on both parts (loose end and ratchet)
The labels are inside, protected between the webbing
Ideal for open transports, no more tearing of the label in the wind
Galvanized metal ratchet, good rust protection in rain
Din / Standard: EN 12195-2

The optimal belt for securing your load.

Do not play with your life and that of your fellow men!!!

Belts should be checked regularly for cracks and wear and tear and should be replaced immediately in the event of damage (discarded). Only then is optimal use guaranteed.

!!! Attention: Belts are not suitable for lifting loads!