REGULAR PRICE: £199.99

About this item

• 【EASY INSTALLATION】With quick release fastener and synthetic rubber sucker, it is easy to fix your bikes on the car roof. The weight of our bike rack is between 2.1-4.5kg, it is portable to carry and install. And there is a installation video in the Picture 7, please follow the instructions or the installation video.【ATTENTION】If the suction cups could not work normally, please notify us, we could send the replacement suction cups to you.
• 【NOT DAMAGE YOUR CAR】Synthetic rubber suckers are sucked on the car roof, will not damage to the paint and sheet metal of your car, and the maximum load capacity of each bike on the car bike rack is 20kg. This bike carrier for car make travelling with your bikes come true.
• 【STABILITY&SECURITY】The aluminum alloy body is sturdy enough to hold your bike. Vacuum pumping suction cups ensure firmness of the rack. And the crank is fixed with high-intensity hook and loop fasteners, which could prevent pedals from attriting roof of cars.
• 【COMPATIBILITY】Roof top bike rack for one, two and three bikes, are suitable for most bicycles, and could be used for all almost vehicles like sedans, coupes, hatchbacks, SUV, vans, and more. Meets your need to transport your bikes during road trips or camping excursions.
• 【LOW WIND-RESISTANCE】Cabinet and delicate rack shape could controll wind resistance, and also greatly lower the noise, let your driving environment be more comfortable. ☆☆PLEASE NOTE: This sucker bike rack is quality guaranteed, we provide after-sale warranty. If you have any questions or suggestions, please feel free to notify us, we are fully at your service.

Product Description

Package included:

• Bike carrier
• Rear wheel suctions
• Hook and loop strap for the crank

Adapters for thru axle:

The standard accessories come with a quick release(4.4mm*100mm length)and adapters

(5mm*100mm length). If you need non-standard adapters, please purchase separately.

Three adapters size available:

• 15mm * 100mm
• 15mm * 110mm
• 20mm * 110mm

ROCKBROS Suction Cup Bike Rack Car Roof-Top Cycle Rack Carrier Car Top Bicycle Holder

Product specifications:

Brand: ROCKBROS

Material: Aluminum Alloy + Rubber

3 models available: for 1/2/3 bikes

Length: approx 47cm / 82cm / 92cm

Weight: approx 2.1kg / 3.4kg / 4.5kg

Length of rear wheel strap: 10cm

PLEASE NOTE:

ROCKBROS Bike Racks are suitable for the width of bike front fork which isshorter than 110mm.

Attention:

If the suction cups could not work normally, please notify us, we could send the replacement suction cups to you, we will take full responsibility with any quality problems.

INSTALL WITH SUCTION CUPS Suction cups won't hurt your car. Please press the suction cups to get the air out. Press down on the cylinder rod until you can no longer see the white line.	HOOK & LOOP FOR CRANK The hook and loop strap helps to fix the crank well keeping it stable. And avoid damaging to your car and your bike.	PROTECTION This ROCKBROS suction cup bike rack is very easy to install and store. If you're not using it, you can just demot it. Anti-dust lid protects the suction cups.

Precautions when using ROCKBROS Suction Bike Rack:

• 1. The maximum load of one-bike rack is 20KG. The load-bearing capacity of the second-bike rack and third-bike rack is more than 20KG, but please consider the bearing capacity of your own car.
• 2. When used on sunroof, pls DO NOT open the car sunroof when the rack is installed, and also it is necessary to confirm there are no cracks or small holes on the sunroof before installation.
• 3. Do not use the bike rack on the convertible top and roadster top car.
• 4. Before using, please check all the bolts are tightened.
• 5. Wipe the suction cup and car roof surface with a clean wet towel, prevent the roof rack from sliding o due to accumulated water.
• 6. When installing, the white plunger need to be pointed towards the back of your car.
• 7. Make sure there is NO obvious sign of rebound from the cylinder rod.
• 8. Speed should be less than 120 Km/h when using the bike rack, and please check whether the bike rack still works normally every 2 hours.
• 9. After using, please cover up the suction cups.

Installation steps (the video about how to install the rack is in pic 7):

• 1. Clean up the car roof and all the suction cups with a clean and soft towel.
• 2. Install front fork holders on front bike rack, then put the roof rack on the chosen location, press the suction cup vertically against the car roof with one hand while the other hand pushes the cylinder rod to extract the air until the white line is in the pump.
• 3. Remove the bike front wheel then lock the front fork on the roof rack.
• 4. Confirm the location of rear wheel and install the rear suction cup like the installation steps of front suction cups.
• 5. Fix the rear wheel and also the crank with hook and loop straps.

When you go on vacation or take a trip by car and also want to take with your bikes, ROCKBROS roof-top bike rack is your best choice.

The suction cup design, makes the bike carrier do not damage the paint and sheet metal of your car.