Evolution Power Tools FURY5 – S Fury 5-S Table Saw With Multi-Material Cutting, 1500W, (230 V)

RRP PRICE: £189.99
SALE PRICE: £174.95
YOU SAVE: £15.04

Utilises patented Evolution multipurpose cutting technology, optimised to cut mild steel, non-ferrous metals, wood and plastic with one blade
Cutting mild steel leaves an instantly workable finish, producing no heat, no burr and virtually no sparks
Powerful 1500 W hi-torque motor, bevel cutting up to 45 Degree, cutting depth of up to 85 mm through wood, adjustable rip fence and dust extraction
F255TCT-24T multi-purpose blade (24 teeth) included
3 years limited warranty (only valid if purchased in the UK)


Powerful Motor Cut through up to 3mm mild steel thanks to Powerful 1500W hi-torque motor with optimized gearbox & blade system	Bevel & Mitre Capability Achieve up to a 45° bevel or 60° mitre by turning the bevel wheel at the front or the angle settings on the material pusher. Use the detents to reach the required angle every time!	Effective Dust Extraction Keep your workshop clean! With Integrated dust ports above and below the blade, dust is captured when fitted to a vacuum system


Material Pusher & Clamp Materials can be put up against the material fence and fed through the blade, with the assistance of the anti-vibration clamp, both ensuring a straight cut every time!	Rip Fence (Right) Putting your materials against the adjustable rip fence allows you to feed the material through, easily and with a perfectly straight finish. Use the fence measurements for extra accuracy	Push Stick Included Safety first! The FURY5-S comes with a push stick to enable you to feed in the material, all the while making sure your fingers are well away from the blade when cutting

Achieve a perfect -60˚ – +60˚ mitre cut with the simple adjustment of the material pusher. Evolution saws cut accurately to within 0.5˚


Wood Trim down, worktops & doors, reclaimed timber. Even cut through wood with embedded nails!	Ferrous Metals Cut weld-ready mild steel, whether that be 6mm sheet or tube material	Non-Ferrous Metals Cuts through materials such as checker plate with virtually no heat or sparks!	Plastic Cuts through plastics such as acrylic sheets & drainage tubing cleanly without burning or melting